BFKK PLA Filament 1.75mm Yellow 1kg Spool 3D Printers Accessory
1.75 mm yellow PLA filament on a 1 kg spool with ±0.02 mm accuracy for most FDM printers
- Product colorYellow
Color Yellow
- Reliable prints with no clogs, bubbles or tangles
- 100% neat winding prevents snags and jams
- ±0.02 mm accuracy fits almost every 1.75 mm FDM printer
- 00" spool with 2.20" hub mounts on most machines
- Print at 200–230 °C nozzle, 50–65 °C bed, 50–100 mm/s speed
PLA Filament 1.75 mm Yellow 1 kg
This PLA filament suits hobbyists and makers who print with FDM machines and want a bright yellow finish. It comes on a 1 kg spool sized at 8.00" diameter, 2.50" width and a 2.20" hub hole, so it fits most printer holders. The material is formulated for reliable extrusion and consistent layer adhesion.
Neat winding and tight tolerance
A self-developed winding device delivers a 100% neat rate that reduces tangles and jams during long prints. Dimensional accuracy is held to +/- 0.02 mm, keeping the 1.75 mm diameter within a narrow band that works across a wide range of FDM printers. These two factors together lower the chance of nozzle clogs and failed prints.
Simple setup with recommended settings
Load the spool, feed the filament and set the nozzle temperature between 200 and 230 °C, the bed temperature between 50 and 65 °C and the print speed between 50 and 100 mm/s. Problems usually arise when the hot-end runs cooler than 200 °C or the bed is left unheated, causing poor first-layer adhesion and warping.
How it compares
Measured against everything we stock in 3D Printing Accessories & Materials, at today’s prices. Recalculated every night.
- Price $28.99
- Typical for this category: the median of 590 items is $31.99.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Yellow |
Other versions of this model
5 more in the same range
BFKK PLA Filament 1.75mm White 1kg Spool Dimensional Accuracy +/- 0.02 mm
- White
Questions about this item
How often will the 1.75 mm spool need replacing during heavy printing?
A 1 kg spool lasts many prints; replacement frequency depends on model volume and infill settings.
What is the first limit reached during long prints at 100 mm/s?
Dimensional accuracy of ±0.02 mm and the recommended 200–230 °C nozzle range set the practical boundaries.
Does the PLA give off strong fumes or heat when running all day?
PLA prints at 200–230 °C with a 50–65 °C bed, producing low odour and minimal warping during extended sessions.
More in 3D Printing Accessories & Materials
Similar items
BIQU Panda Jet Pack V2.0 Transparent Shell 3D Printer Accessory
- Panda Jet Pack V2 T…
- US7-1060000840
MakerBot Grip Surface 112048-00 for Replicator Mini+ 3-Pack 3D Printers Accessories
Flashforge Nozzle Assembly AD5X 300C 0.25 0.4 0.6 0.8 3d printers accessory
LORDWORLD M2 Hardened Steel Nozzle V6 1.75mm .6mm 3D Printers Accessories
Flashforge Nozzle Assembly Adventurer 5M Series 0.8mm 280C 3d printers accessory
- Print Jet Head
Adventurer 5M Pro Nozzle 0.6mm 32mm³/s 280°C 3s Quick-Detachable 3d printers accessory
- 0.4 mm
- AD5-HS-Nozzle










