Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Protects Raspberry Pi 4 with a tool-free three-piece case, PWM-controlled 40 mm fan, four aluminium heatsinks, a 3.6 A USB-C power supply, card reader and 4K micro-HDMI cable
This kit provides a three-part enclosure, a PWM-controlled cooling fan, four aluminium heatsinks, a USB-C power supply, a micro-HDMI cable, a micro-HDMI to HDMI adapter and a USB card reader. It is designed for Raspberry Pi 4 boards with 2 GB, 4 GB or 8 GB of memory. The case snaps together without screws while keeping every port accessible. Builders who need a case for a different single-board computer cannot use this kit.
The enclosure consists of three pieces that press together tightly without fasteners, leaving GPIO, HDMI, USB and card-slot openings clear. A 40 x 40 x 10 cm PWM fan and four heatsinks handle heat dissipation; fan speed is adjustable through the official Raspberry Pi OS or by driving the GPIO pins with third-party software. An integrated on/off switch lets you cut power without unplugging the cable. The power supply carries TUV and RoHS certification. Users who require a larger fan or liquid-cooling mounting points will not find them here.
A 1 m gold-plated micro-HDMI to HDMI cable rated for 4K at 60 Hz connects the board to a display, while the micro-HDMI to HDMI adapter offers an alternative hookup. The included USB card reader adds microSD and SD card access without an extra dongle. The 18 W USB-C supply delivers 5 V at 3.6 A to meet the board's power demands. Anyone needing a longer video cable or a higher-wattage supply for additional peripherals must source those separately.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Processor | |
|---|---|
| Processor | Other |
The 40 mm PWM fan plugs into the Raspberry Pi 4 GPIO header and its speed is managed by the official Raspberry Pi OS or by third-party software driving the GPIO pin.
The snap-together case wraps the board without screws and leaves every port — GPIO, HDMI, USB and card slot — fully accessible.
Attach the four aluminium heatsinks to the main chips, seat the board in the base, connect the fan to the GPIO pins, snap the middle and top covers on, then plug the 18 W USB-C supply into the Pi’s power port.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?