Battery Technology Inc. ET-LAD60W-BTI projector lamp 330 Watt 2000 Hrs
- 330 W
- 2,000 Hrs.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 270-watt replacement lamp module with a 2,000-hour rated life for Boxlight projectors
This 270W lamp module fits Boxlight projectors that require the SE-12SF or SP-LAMP-LP5F part. It arrives as a fully assembled bulb and housing, so technicians and AV staff can swap it without handling a bare burner. The unit is supplied new and ready for immediate installation.
The lamp uses a Phoenix SHP 270W bulb rated for 2,000 hours of operation. Projectors designed for a different wattage or bulb type will not strike or will overheat, so verifying the 270W requirement against the service manual is the single decisive check. No other electrical or optical parameters are provided.
Because the bulb comes pre-mounted in its housing, installation is a matter of opening the projector lamp door, removing the old module, and seating the new one until the connector engages. The most common issue is forgetting to reset the projector’s lamp-hour counter after replacement, which leaves the replacement warning active. Ensure the door latch closes fully, as an open interlock will prevent the lamp from striking.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Boxlight |
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 270 W |
The 270W Phoenix SHP bulb restores the projector's original brightness and colour balance because it matches the factory specification for the SE-12SF module.
The module is built to the SP-LAMP-LP5F form factor, so it only fits the Boxlight projectors that list that exact part number.
The lamp ships as a complete bulb-and-housing unit designed to slide into the SE-12SF compartment without extra brackets or adapters.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?