Brute Networks 10G-SFPP-T 10/100/1000BASE-T 30m SFP+ transceiver
Copper SFP+ transceiver delivering 1 Gbps over RJ45 up to 30 m with 0–70 °C commercial rating
- Port count10/100/1000Base-T
- Product typeTransceiver
- Supported standardsRJ45
- Maximum range30m
- Transfer speed1 Gbit/s
- Indicator lightsPower, Link/Activity, Full-Duplex, and Speed
- 30 m copper reach via RJ45 connector
- 10/100/1000 Mbps auto-negotiation on a single port
- Commercial 0–70 °C operating range
- Digital diagnostics monitoring built in
- MSA-compliant design for Brocade compatibility
Copper SFP+ for Brocade gear
This transceiver plugs into an SFP+ cage and presents an RJ45 port that negotiates at 10, 100 or 1000 Mbps over copper twisted-pair. It is built for network engineers who need a short copper uplink on Brocade switches or routers without running fibre.
Replaces fibre modules for short runs
When a link stays within 30 metres and the far end also has an RJ45 port, this module removes the need for patch cords, patch panels and separate media converters. The jump is worth it when cabinet density or cabling cost makes copper simpler than OM3 or single-mode fibre.
Hot-plug install with standard RJ45
Insert the module while the switch is powered on, then connect a Cat5e or better patch cord to the RJ45 jack. The main pitfalls are exceeding the 30 metre reach, using cable below Cat5e quality, or plugging into a port that does not support 1000BASE-T negotiation.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $93.99
- Cheaper than about 59% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Brocade |
| Model name | 10G-SFPP-T |
| Product type | Transceiver |
| Performance | |
| Transfer speed | 1 Gbit/s |
| Connectivity | |
| Supported standards | RJ45 |
| Maximum range | 30m |
| Ports & slots | |
| Port count | 10/100/1000Base-T |
| Size & build | |
| Product weight | 2 oz |
| Environment & compliance | |
| Temperature range | 0? ~ 70? C |
| More details | |
| Indicator lights | Power, Link/Activity, Full-Duplex, and Speed |
Questions about this item
Will the RJ45 connector on this SFP+ transceiver fit a standard 10/100/1000Base-T switch port?
Yes, the module uses an RJ45 connector that plugs directly into any standard 10/100/1000Base-T port supporting SFP+ form factor.
What is the correct way to insert the transceiver so the latch engages without damaging the port?
Align the module with the cage, slide it in until you feel a firm click, then pull gently to confirm the latch is seated before connecting the copper cable.
How do I know when the transceiver needs replacement if the link LEDs show power and activity?
Monitor the digital optical monitoring data for rising temperature or voltage alarms; persistent errors above 70 °C or link drops at 30 m indicate the module should be swapped.
More in SFP & SFP+ Transceiver Modules
Similar items
STARTECH ET91000SFP2C SFP transceiver card module open slot Gigabit Ethernet fiber media converter
- 1 - SFP Slot Female…
- Converter
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
AddOn DS-SFP-FC8G-SW-AO 8Gb 850nm 150m SFP+ transceiver
- SFP+
- Cisco®
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
Axiom GLC-TE-AX 1000Base-T SFP Transceiver 40km
- Transceiver
- 1310 nm





