Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB registered DDR4 RDIMM with ECC, CL15 latency at 2133 MHz and 1.2 V operation
This 16GB DDR4-2133 registered RDIMM operates at 1.2V with CL15 latency and 2Rx4 organisation. It carries ECC and is built with major-brand chipsets to meet IBM part 46W0796 specifications for server platforms. The module uses the standard 288-pin DDR4 form factor.
The registered design and ECC function target enterprise servers that require buffered, error-correcting memory. Builders assembling consumer desktops or workstations that accept only unbuffered non-ECC UDIMMs cannot use this module. Systems limited to lower-density ranks or different voltage requirements should also select a different part.
The on-board register buffers address and command signals while ECC corrects single-bit errors, a combination required by the qualified IBM server platform. Buyers whose motherboards lack registered-DIMM support or ECC capability will find the module incompatible regardless of capacity or speed.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | IBM |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.2 V |
Yes, the module is rated for DDR4-2133 (PC4-17000) and will operate at up to 2133 MHz on supported platforms.
The module uses the standard 288-pin DDR4 RDIMM form factor measuring 5.3 inches long, matching industry DIMM slot dimensions.
Align the notch on the module's gold edge connector with the key in the slot, press down firmly and evenly until both side clips click into the locked position.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?