Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4-2400 CL15 registered ECC RDIMM for HP-compatible server upgrades
This 16GB DDR4-2400 registered RDIMM is built for HP servers that require ECC protection and registered signalling. The 1Rx4 organisation and 1.20V operation match the 854594-B21 specification. Major-brand DRAM from Samsung, SK Hynix or Micron ensures OEM-level reliability for mission-critical workloads.
Registered DDR4 modules run at 1.20V, keeping power draw low inside dense server chassis. Passive operation means zero acoustic contribution and no active cooling requirement. Standard JEDEC thermal limits apply under sustained load in properly ventilated bays.
Replaces lower-capacity DDR4 RDIMMs or mismatched kits that force the memory controller to run at reduced speeds. The jump is worth it when adding identical 16GB modules to populate all channels for maximum bandwidth. Not suited for platforms that need unbuffered UDIMMs, higher frequencies or capacities beyond 16GB per slot.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.2 V |
Power off the server, open the chassis, align the notch on the 288-pin DDR4 module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 16GB registered DIMM is detected at 2400 MT/s with ECC active.
No scheduled maintenance is required; if a future capacity upgrade is needed, replace with matching 1Rx4 registered DDR4-2400 modules to keep rank and voltage consistent across channels.
The DDR4-2400 CL15 timing and 1.20V operating voltage set the throughput ceiling; sustained workloads will hit the 19200 MB/s bandwidth limit before thermal throttling becomes a factor.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?