Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4-2133 ECC registered RDIMM for HP servers, CL15, 1.20 V, 2Rx4
This 16GB DDR4-2133 registered DIMM is built for HP server platforms requiring ECC memory. It targets administrators upgrading existing infrastructure to support larger workloads or more virtual machines. The module operates at PC4-17000 speed with a CAS latency of CL15.
The module uses major brand chips from Samsung, SK Hynix or Micron in a 2Rx4 configuration on a 288-pin PCB. Registered buffering reduces electrical load on the memory controller, allowing higher capacities per channel. ECC functionality detects and corrects single-bit errors to maintain data integrity in critical applications.
The PC4-17000 interface caps peak transfer rates at 17 GB/s per module regardless of CPU capabilities. Systems requiring higher memory bandwidth will not benefit from faster processors unless faster DIMMs are installed. Mixing this module with different speeds forces all channels to run at the lowest common denominator.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.2 V |
The module runs at DDR4-2133, which is the JEDEC standard for PC4-17000.
Yes, it uses the standard 288-pin DDR4 form factor and is built to HP part 780673-081 specifications.
Power down, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC and registered mode are active.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?