Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8GB DDR4 2133 ECC UDIMM with 2Rx8 rank, CL15 latency and 1.2V operation for HP-compatible servers
This unregistered 288-pin module delivers 8 GB of DDR4 2133 memory with CL15 timing and 1.20 V operation. It carries ECC protection and a 2Rx8 rank layout for data integrity in server workloads. The part matches HP part number 819800-001 and uses major-brand DRAM from Samsung, SK Hynix or Micron. It is suited for administrators expanding capacity in supported HP ProLiant or Apollo systems.
Upgrading from lower-speed DDR4 or non-ECC modules adds error correction and the rated 2133 MT/s throughput where the platform supports it. The jump is worthwhile when the server’s memory controller and BIOS recognise the 2Rx8 organisation and can run at the specified voltage. Mixed-rank populations may limit channel speed, so the gain applies only when all slots use matching specifications.
Confirm the motherboard accepts unregistered 288-pin DDR4 UDIMMs and supports 2Rx8 density at 1.20 V. Check the qualified-vendor list or maintenance guide for maximum DIMMs per channel and any rank-per-channel limits. Ensure all modules in a channel share identical speed, latency and rank configuration to avoid down-clocking or boot failure.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Total capacity | 8 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Unregistered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
The module uses the standard 288-pin DDR4 UDIMM form factor that matches HP 819800-001 slots, so it installs directly without adapters.
Insert the stick firmly until the retention clips click; the server auto-detects 2133 MHz CL15 timing and ECC at 1.20 V with no manual BIOS changes required.
The lifetime warranty covers the module for as long as you own it, backed by 100% testing and validation from major-brand Samsung, SK Hynix or Micron chips.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?