Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB DDR4 SODIMM with ECC, 2133 MT/s speed and CL15 latency for HP-compatible servers
This 8 GB DDR4-2133 module is built for HP servers and workstations that require ECC memory. It carries the T0H92AA part number equivalent and uses major-brand chips from Samsung, SK Hynix or Micron. The unregistered 2Rx8 design fits standard DDR4 SODIMM slots in compatible platforms. Buyers who need registered DIMMs or a different form factor cannot use this module.
The module runs at the standard DDR4 voltage of 1.20 V and is rated at CAS latency 15. ECC circuitry corrects single-bit errors without adding measurable latency in normal workloads. Power draw stays within the DDR4 SODIMM specification for this speed grade. Systems that require a different voltage or latency profile will not match these specifications.
Each stick uses a 288-pin edge connector and is tested for full HP compatibility before shipping. Modules from the same order are guaranteed to match, preventing mixed-rank or mixed-vendor issues. The major-brand chipset ensures consistent quality across the batch. Builds that need a DIMM form factor or a non-ECC configuration must choose a different product.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Total capacity | 8 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Unregistered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Align the notch on the module with the key in the slot, press firmly until both side clips click, and verify the system recognises the full 8GB at 2133 MHz. The common mistake is stopping before the clips engage, leaving the module partially seated.
No scheduled maintenance is required; the module is rated for continuous server operation at 1.20 V. Replace it only if memory diagnostics report correctable ECC errors that exceed the platform threshold.
The CAS latency of 15 cycles at 2133 MHz sets the baseline response time; under sustained write-heavy workloads the memory controller will hit this timing ceiling before thermal or voltage limits become a factor.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?