Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR4 registered ECC RDIMM running at 2400MHz CL15 with 1.2V operation for HP server upgrades
This module delivers eight gigabytes of registered DDR4 memory at 2400 MHz with CL15 latency. It is built for HP servers that require ECC registered DIMMs and matches the original HP part number 852545-001. The single-rank 1Rx8 organisation suits standard server memory channels. Buyers needing higher capacities or unbuffered DIMMs cannot use this part.
The DDR4-2400 standard caps data-rate at 2400 MT/s and the registered buffer adds one cycle of command latency per channel. ECC protection is mandatory on this module, so platforms without ECC support will not benefit from the error correction. Systems limited to lower DDR4 speeds will down-clock the module automatically. Builders requiring unregistered or load-reduced DIMMs must choose a different form factor.
The eight-gigabyte density combined with 1Rx8 registered architecture determines whether the module fits the server's memory population rules. Each slot consumes one rank, so maximum system capacity depends on the number of available DIMM slots and the platform's rank limit per channel. Servers that require dual-rank or quad-rank modules for full performance will not reach their optimal configuration with this part.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HP |
| Total capacity | 8 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
This module is sold as a single 8GB stick; add multiple identical sticks to reach the total memory your server requires.
The module runs at DDR4-2400 with CL15 latency at 1.2V, delivering up to PC4-19200 bandwidth when the platform supports that speed.
The 288-pin registered DDR4 form factor fits compatible HP servers; the register buffers address and command signals so the memory controller can drive larger capacities reliably.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?