Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB registered ECC DDR4-2933 module with 1Rx8 organisation for HPE-compatible servers
This 8GB DDR4-2933 Registered ECC module is built for servers that require HPE part number P19040-H21 compatibility. It operates at 1.20V with a 1Rx8 rank configuration on a 288-pin DDR4 SDRAM form factor. The module uses major-brand chips from Samsung, SK Hynix, or Micron and is validated for 100% compatibility with the target platform. It is intended for administrators maintaining existing DDR4 infrastructure.
The registered design places a buffer between the memory controller and the DRAM chips, reducing electrical load on the bus during continuous operation. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long-running workloads. Major-brand components are 100% tested and validated to maintain signal integrity at the rated 2933 MT/s speed. Orders are filled with identically matched modules to avoid timing mismatches.
The DDR4 interface caps bandwidth at the PC4-23400 specification, so this module cannot exceed the 2933 MT/s data rate. Capacity is fixed at 8GB per DIMM, limiting total memory to the number of slots the server provides. Registered ECC modules are not interchangeable with unbuffered or non-ECC variants, so mixed populations are not supported. Buyers needing higher densities or faster speeds must migrate to a newer memory generation.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HPE |
| Total capacity | 8 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.2 V |
The module operates at 1.20 V and DDR4-2933 speed with a single-rank 1Rx8 layout, which keeps power draw and thermal output low for continuous server workloads.
The module requires a server motherboard with 288-pin DDR4 slots that accept registered ECC memory at 1.20 V.
Mixing ranks, speeds or voltages can prevent the system from posting; the server will run all installed modules at the lowest common speed and voltage, so identical modules are recommended.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?