Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB registered DDR4-2133 ECC module with CL15 latency for Dell servers
This 8GB registered DDR4 module runs at 2133 MT/s with CL15 latency and 1.20V operation. It uses a 288-pin 2Rx8 layout and includes ECC for error correction. The part is validated for Dell servers and replaces Dell part number A7945704. It is built with major-brand DRAM from Samsung, SK Hynix or Micron.
The jump is worthwhile when a server needs registered memory with ECC for data integrity and the current slots are populated with smaller modules. Adding this 8GB stick increases total capacity while maintaining the required registered signal buffering. It also helps when matching existing 2133 MT/s speeds across all channels for stable operation.
Align the notch on the 288-pin edge connector with the motherboard key and press until the latches click. Ensure the server supports registered DDR4 and that all populated slots use identical speed and rank configurations. Mismatched ranks or mixing registered with unbuffered DIMMs will prevent boot or cause instability.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Dell |
| Total capacity | 8 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Yes, the 288-pin DDR4 registered form factor matches standard server DIMM sockets.
Align the off-centre notch on the gold edge with the slot key, press straight down until both side clips click.
These chips are rated for continuous operation; replacement is only needed if a module fails or capacity must be increased.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?