Brute Networks GLC-FE-100LX 100BASE-LX 10km SMF 1310nm SFP transceiver
A 100 Mbps SFP transceiver for single-mode fibre, reaching 10 km at 1310 nm with LC duplex connector
- Port count100Base-LX
- Product typeTransceiver
- Supported standardsSMF
- Optical wavelength1310 nm
- Fiber modeSingle-mode Optical Fiber
- Maximum range10km
- 10 km reach on single-mode fibre at 1310 nm wavelength
- 100 Mbps data rate over LC duplex connection
- Operates from 0 to 70 °C commercial range
- MSA compliant and coded for Cisco equipment
- Digital diagnostic monitoring enables real-time link health
10km Single-Mode SFP Transceiver
The Brute Networks GLC-FE-100LX is a 100BASE-LX SFP transceiver built for single-mode fibre links up to 10 kilometres. It operates at a 1310nm wavelength with an LC duplex connector and delivers a 100 Mbps transfer rate. Network engineers use it to add or replace a long-reach uplink on Cisco routers, switches or servers.
Replaces Costly OEM Long-Reach Modules
This third-party module is coded for 100 percent Cisco compatibility and meets MSA standards, so it initialises identically to the original part. The jump is worth it when a deployment needs 10km reach at 100 Mbps without paying OEM list prices. It is not suited for links that require higher bandwidth or multi-mode fibre.
Commercial-Temperature Sustained Operation
Rated for 0 to 70 degrees Celsius, the transceiver maintains link stability under continuous load across the full commercial temperature range. Digital optical monitoring provides real-time health data during extended runs. The 1 oz weight and standard SFP form factor ensure consistent airflow in dense chassis.
How it compares
Measured against everything we stock in SFP & SFP+ Transceiver Modules, at today’s prices. Recalculated every night.
- Price $34.99
- Cheaper than about 83% of the 1,470 comparable items (median $138.49).
New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | CISCO |
| Model name | GLC-FE-100LX |
| Product type | Transceiver |
| Performance | |
| Transfer speed | 100 Mbit/s |
| Connectivity | |
| Supported standards | SMF |
| Optical wavelength | 1310 nm |
| Fiber mode | Single-mode Optical Fiber |
| Maximum range | 10km |
| Ports & slots | |
| Port count | 100Base-LX |
| Size & build | |
| Product weight | 1 oz |
| Environment & compliance | |
| Temperature range | 0? ~ 70? C |
| More details | |
| Indicator lights | Power, Link/Activity, Full-Duplex, and Speed |
Questions about this item
Which fiber connector and cable type does this 1310nm SFP need for a 10km link?
It uses an LC duplex connector with single-mode fiber to reach 10km at 1310nm.
What is the correct way to seat this SFP in a Cisco switch slot, and what step is often missed?
Slide the module in until the latch clicks, then remove the dust caps and insert the LC cables; skipping the latch click leaves the link down.
When should the transceiver be replaced given its operating temperature range?
Plan replacement if the ambient temperature exceeds 70 °C or if link errors appear after extended operation at the upper limit.
More in SFP & SFP+ Transceiver Modules
Similar items
STARTECH LX-ST SFP transceiver 1000Base-LX 10 km 1310nm
- 1000Base-LX
- SFP Transceiver Mod…
HPE JD089B Gigabit Ethernet SFP Transceiver 1000Base-T RJ-45
- Transceiver
- HCRP, SPP
STARTECH SFP1GLXEMCST SFP transceiver 1 Gbps 1310 nm 10 km LC
- LC
- Transceiver
STARTECH MASFP10GBLR SFP+ transceiver 10GBASE-LR 10km 1310nm LC
- Transceiver
- IEEE 802.3ae 10 Gbi…
SFP-10G-RJ45-A3R SFP transceiver 10G/5G/2.5G/1G RJ-45
- Silver
- A1: 10G/5G/2.5G/1G…





