Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 2666 ECC registered RDIMM running at 1.2 V for HPE-compatible servers
This 16GB registered DIMM is built to match HPE part number P18444-B21 and runs at DDR4-2666 with a 1.20V operating voltage. It uses a 2Rx8 layout and major-brand DRAM chips from Samsung, SK Hynix or Micron. The module is designed for servers that require ECC registered memory in a 288-pin form factor.
The registered buffer reduces electrical load on the memory controller, helping stability when all slots are populated under continuous workloads. ECC corrects single-bit errors on the fly, protecting data integrity during long-running compute or virtualisation tasks. Operation at the standard 1.20V keeps power draw predictable across extended periods.
Confirm that your server platform accepts DDR4 registered DIMMs and check the maximum capacity per channel before ordering. Mixing registered and unbuffered modules is not supported, so all installed DIMMs must share the same registered type. Ensure the memory configuration follows the vendor’s population guidelines for 2Rx8 modules.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | HPE |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
The 1.20V DDR4 module operates at a low voltage, reducing power draw and heat output during continuous server operation.
Yes, the motherboard must provide a 288-pin DDR4 registered DIMM slot with ECC enabled for this 2Rx8 module to function.
The module will down-clock to match the slowest installed DDR4 speed, so it can operate alongside slower DDR4 modules.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?