BUCIER 120mm PCIe 3.0 X4 Riser Cable internal power cable
A PCIe 3.0 x4 riser cable extending a slot by 120 mm with a 90-degree connector for flexible card placement
- Product colorBlack
- PCIe 3.0 x4 bandwidth up to 4 GB/s for M.2, Wi-Fi and sound cards
- 64-pin full-function design supports 2.5 G diskless-boot, capture and RAID cards
- 90-degree female slot accepts x1, x4, x8 and x16 expansion cards
- Tinned-copper Teflon core with PVC jacket bends 180° without signal loss
- Plug-and-play installation in anti-static bag; avoid touching gold fingers for best performance
What the cable does
This BUCIER riser cable carries a PCIe 3.0 x4 link over a 120 mm flexible tail so you can mount M.2, Wi-Fi, FireWire, USB or sound cards away from the motherboard slot. The 64-pin connector handles every lane configuration from x1 to x16 and is backward compatible with PCIe 2.0 and 1.0.
Who should use it and who should not
Builders who need to relocate a low-profile expansion card in a tight chassis will appreciate the 90-degree female socket and 180-degree bend radius. Users looking for hot-plug support or a longer reach than 120 mm should look elsewhere.
How it fits the build
The tinned-copper core wrapped in Teflon and PVC lets you route the cable around drive cages or behind the motherboard tray without signal loss. Plug the male end into the board, seat the card in the right-angle slot, and the assembly stays secure inside an anti-static environment.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 58% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | BUCIER |
| Model name | PCIE30-X4-120MM-0090D |
| Product color | Black |
Questions about this item
What motherboard slot is needed for the PCIe 3.0 x4 riser cable?
A free PCIe x4, x8 or x16 slot running at Gen 3.0 or Gen 2.0 will carry the four-lane signal.
Will a PCIe 2.0 x1 capture card work in the 90-degree female socket?
Yes, the socket accepts x1, x4, x8 and x16 cards and the cable is backward compatible with Gen 2.0 and Gen 1.0.
How can I verify the link is running at the expected 3.0 x4 speed after installation?
Check the negotiated link width and speed in the OS device manager or BIOS; it should show x4 at Gen 3.0.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 10pcs IDE 4Pin to SATA 15p Y Splitter 10cm internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





