Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 30-metre USB 2.0 Type A male-to-male cable supporting 480 Mbps data transfer for hard drives, printers and other peripherals
This 100-foot USB 2.0 cable connects two Type-A ports for data transfer. It supports external hard-drive enclosures, printers, modems, cameras and other USB peripherals. The link runs at up to 480 Mbps and remains compatible with USB 1.0 and 1.1 devices. Plug-and-play operation requires no extra drivers.
The long passive copper run draws power from the host port and adds no active electronics. Signal quality depends on the host controller and the connected device meeting standard USB 2.0 voltage and timing specs. No external power adapter is included or required by the cable itself. Heat and noise are negligible because the assembly carries only low-voltage differential signals.
Under continuous load the 480 Mbps ceiling is shared with protocol overhead and host scheduling, so real-world bulk transfer rates sit below the nominal figure. Very long cables can increase bit-error rates if the host or device operates near the edge of the electrical spec. The cable suits steady, moderate-bandwidth streams rather than high-speed burst workloads.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Lighting Connector to USB A |
Plug each Type A Male connector into the host and peripheral ports; the step often missed is confirming both devices support USB 2.0 or 1.1 speeds so the 480Mbps link negotiates correctly.
Inspect the connectors and jacket periodically for wear or kinks; replace the cable if the moulded strain reliefs crack or if intermittent disconnects appear during 480Mbps transfers.
Signal attenuation over the 30M length is the first limit; the USB 2.0 spec expects shorter runs, so extended high‑speed use may drop to 1.1 speeds or require a powered hub.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?