Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a motherboard 9-pin header to a standard USB 2.0 Type A port using a 10 cm Dupont cable, supplied as a two-pack
This two-pack provides a USB 2.0 Type A female port that connects to a 9-pin motherboard header with 2.54 mm pitch. Each cable is 10 cm long and intended for internal wiring jobs where a standard USB socket is needed. The adapter lets builders bring an external-style USB port to a front panel or bracket without soldering. It is a simple, passive link for low-speed and high-speed USB 2.0 signals.
The female Dupont header uses a 0.1-inch pin spacing that matches common front-panel USB headers on desktop motherboards. The short 10 cm tail keeps cable clutter minimal inside tight cases and routes easily through a rear PCI slot opening. A moulded strain relief protects the solder joints where the Dupont housing meets the wires. No active electronics are present, so the link relies entirely on the host controller for signal integrity.
This cable replaces hand-crimped or repurposed wires when adding a USB 2.0 Type A socket to a chassis cut-out or bracket. The jump is worth it when a builder needs a reliable, keyed connection that cannot be inserted backwards. It does not suit builds that require USB 3.0 or higher throughput, nor situations where a longer internal run is needed.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Ports & slots | |
|---|---|
| Connection type | Lighting Connector to USB A |
Yes, the cable is built for USB 2.0 so data rates top out at the 2.0 specification limit.
The 9-pin female header uses a 2.54 mm pitch, matching standard front-panel USB headers.
Pass the USB-A end through a PCI slot opening, plug it into a rear port, then connect the Dupont end to the 9-pin header, taking care not to reverse the pin-1 orientation.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?