BUCIER USB-C 3.1 to USB 3.0-A 10Gbps OTG Angled 20cm internal power cable
Angled USB-C 3.1 to USB 3.0-A adapter cable supports 10Gbps data and 5V power with OTG function in a 20cm length
- Connector count1
- OTG support enables direct device connections with 10Gbps data and 5V power
- Reversible USB-C 3.1 plug inserts either way for hassle-free mating
- 20cm angled cable fits tight internal spaces around crowded ports
- Backward compatible with USB 2.0 at 480Mbps and USB 1.1 at 1.5Mbps
- Data and power only — no video or audio pass-through supported
20 cm Angled USB-C Adapter
The BUCIER NF-UC-200-UP is a 20 cm internal cable with a USB-C 3.1 male connector angled for tight spaces and a USB 3.0 Type-A female port. It supports USB On-The-Go so compatible devices can act as a host for peripherals. The cable carries USB 3.0 data and 5 V power only.
Replaces Straight Cables In Cramped Builds
The right-angle Type-C plug fits where a straight connector blocks adjacent ports or case walls. The upgrade is worth it when clearance around the female port is too small for a standard cable. It does not add video, audio or alternate-mode signals to a USB 3.0 link.
Limited To USB 3.0 Signalling
The adapter passes SuperSpeed USB at 10 Gbps, Hi-Speed at 480 Mbps and Low-Speed at 1.5 Mbps, but it cannot transport DisplayPort, HDMI or other USB-C alternate modes. OTG host function works only with devices that implement the role swap in hardware. Cable length is fixed at 20 cm.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | NFHK |
| Model name | NF-UC-200-UP |
| Ports & slots | |
| Connector count | 1 |
Questions about this item
Will the 20 cm angled USB-C plug fit behind my motherboard's rear I/O shield?
The 20 cm cable uses an up/down angled USB 3.1 Type-C male connector designed to mate with a female port even when surrounding space is limited.
Which orientation do I plug the reversible Type-C end in first to enable OTG?
Insert the reversible USB 3.1 Type-C male either way up; the OTG function activates automatically once the USB 3.0-A female receives a peripheral.
How often should I replace this 20 cm internal cable to keep 10 Gbps speeds?
No scheduled replacement is needed; the cable maintains USB 3.0 Super-Speed 10 Gbps, 5 Gbps, 480 Mbps and 1.5 Mbps ratings for its service life.
More in Internal PSU & Riser Cables
Similar items
Silverstone CPF01 1-to-2 PWM Fan Splitter Cable 3.94 in
- 3.94 in (10 cm)
- Fan Power Cables
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
STARTECH ATXP4EXT 8in ATX12V 4 Pin P4 CPU Power Extension Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





