BUCIER USB-C Keystone Insert Adapter 10 Gbps 20CM

USB-C Keystone Insert for Wall Panels

This USB-C keystone insert adapter mounts into standard wall plates and patch panels, giving a fixed female Type-C port for clean, professional cable management. The 20 cm shielded PVC pigtail terminates in a male Type-C plug that connects to the host or upstream cable. It is built for installers and system builders who need a flush, secure Type-C outlet in furniture, rack enclosures or workstation cubbies. The safety buckle locks the keystone body into the panel cut-out so the port cannot work loose during repeated insertions.

Home and Office Installers Seeking a Permanent

The part suits anyone fitting a single Type-C access point in a wall plate, desk grommet or patch panel where a tidy, semi-permanent connection is preferred. It supports plug-and-play operation with hot-swapping, so devices can be connected and disconnected without rebooting the host. Users who need longer reach between the panel and the host, or who require multiple Type-C ports from one keystone opening, should look at a different solution. The 0.2 m pigtail length is fixed and cannot be extended without adding another cable.

10 Gbps USB 3.1 Gen 2 Data Rate

The adapter carries a USB 3.1 Gen 2 signal at up to 10 Gbps, delivering full-speed data, video and audio along with 5 V / 3 A charging power. This single bandwidth figure determines whether the insert can handle the throughput demanded by the connected peripherals. If the application requires higher signalling rates such as USB4 or 20 Gbps operation, this keystone will not meet that requirement.