BUCIER USB-C PD Trigger Board Module 2PCS SY070 100W 5-20V
Two USB-C PD trigger boards adjust output from 5 V to 20 V with DIP switches and deliver up to 100 W
- Product type2PCS
- Supports PD 3.0 and QC protocols up to 100W
- Adjustable 5V to 20V output via DIP switch
- Over-temperature and over-voltage protection included
- USB-C input accepts 4V to 22V range
- Two modules supplied for parallel testing
USB-C PD trigger board module
This BUCIER module acts as a USB-C Power Delivery trigger board that negotiates voltages from 5 V to 20 V with a supported source. It is intended for engineers, hobbyists and repair technicians who need to extract a specific DC voltage from a PD-capable charger or power bank for prototyping or testing.
100 W capacity and 5–20 V range
The board supports the PD 3.0 and 2.0 specifications plus BC 1.2, delivering up to 100 W when the attached source allows it. A DIP switch selects the requested voltage step, while built-in over-temperature and over-voltage protection guard the module during high-power operation.
Screw terminals and dual-pack convenience
Each unit provides screw terminals for secure wire connections without soldering, making bench use faster and more reliable. The package contains two identical boards, so a spare is available for parallel projects or permanent installation in separate test fixtures.
How it compares
Measured against everything we stock in Telephone & RJ11 Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 63% of the 360 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Seloky |
| Model name | SY070 |
| Part number | SY070 |
| Product type | 2PCS |
Questions about this item
Will the SY070 board negotiate 20 V from my 100 W laptop charger to run a 12 V router?
Set the DIP switch to 12 V; the module requests that voltage from any PD3.0 or PD2.0 source up to 100 W and delivers it through the screw terminals.
How can I confirm the trigger board has successfully negotiated the voltage I selected?
Measure the screw terminals with a multimeter; a stable reading matching the DIP switch setting (5 V, 9 V, 12 V or 20 V) shows the PD handshake completed.
What comes in the pack and what must I supply myself?
Two SY070 trigger boards are included; you provide the USB-C PD power source and the wires to connect the screw terminals to your load.
More in Telephone & RJ11 Cables
Similar items
GE USB-A to USB-C cable 6 ft 2-pack nylon braided 3 A 480 Mbps black
- RJ-11
- Black
Jabra Enterprise Products 88001-04 GN1216 phone cable 6.54 ft
- Connector on First…
- Audio
iPhone Car Charger Dual Port Cigarette Lighter Adapter 3FT Lightning Cable
- Male-to-Male
- Male-to-Male





