Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Switches two HDMI 2.1 sources to one display at up to 8K 60 Hz or 4K 120 Hz with 48 Gbps bandwidth and de-embeds audio to optical and 3.5 mm analogue outputs
The BG-8K-HS21A routes two HDMI sources to a single display with 48Gbps bandwidth. It supports 8K at 60Hz and 4K at 120Hz with full 4:4:4 colour sampling. HDCP 2.3 compliance keeps protected content flowing without interruption. The unit includes an IR remote and front-panel buttons for source selection.
The 48Gbps pipeline maintains full 12-bit colour depth at the highest resolutions during extended sessions. VRR, FVA and ALLM pass-through remain active continuously, so variable refresh rates and low-latency modes do not drop under load. HDCP 2.3 handshakes stay stable across long playback periods. Advanced EDID management preserves the display link without re-negotiation delays.
Optical S/PDIF output carries LPCM, Dolby or DTS 5.1-channel audio, while the 3.5mm stereo jack provides two-channel LPCM. Verify your sources and display use HDMI Type A connectors compatible with the 19-pin female ports. Confirm cable length and quality support the 48Gbps bandwidth for 8K60 or 4K120 signals. The switcher requires no external power supply, so ensure the HDMI sources can provide sufficient bus power.
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | HDMI Switchers |
| Performance | |
| Bandwidth rating | 48 Gbit/s |
| Display | |
| Maximum supported resolutions | Up to 8K@60 Hz YCbCr 4:2:0 12bit, 4K@120 Hz RGB/YCbCr 4:4:4 12bit |
| Audio & video | |
| Sound | HDMI Input/Output: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD Audio De-embedding Output: Optical: LPCM/Dolby/DTS 5.1CH Analog: LPCM 2CH |
| Ports & slots | |
| Input ports | 2 x HDMI IN [Type A, 19-pin female] |
| Output ports | 1 x HDMI OUT [Type A, 19-pin female] 1 x OPTICAL [S/PDIF] 1 x L/R [3.5 mm Stereo Mini-jack] |
| Size & build | |
| Product dimensions | 5.7 in × 2.7 in × 0.71 in [145 mm × 68 mm × 18 mm] |
| Product weight | 0.57 lb [258g] |
The unit has no fan and draws minimal power, so it runs silently and stays cool during continuous operation.
You need two HDMI 2.1 source devices, one HDMI display, plus an optical cable for 5.1 surround or a 3.5 mm stereo cable for analog audio.
Yes, the switcher passes EDID from the display, so it will automatically negotiate the best common resolution with legacy screens.
More in HDMI & AV Selector Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?