Cable Matters 104040 4-Pin PWM Fan Splitter 2-Pack 4 Inches
A 2-pack of 4-inch PWM Y-cables that split one motherboard header into two fan connections for synchronized speed control
- Refresh frequency4 in (10.2 cm)
- Cable length32.8 ft (10 m)
- Team affiliation2 Piece
- Connector genderMale to Female
- Conductor typeCopper Conductor
- Seller noticeon product combined cancer reproductive, RoHS
- Connect two PWM fans to one motherboard header for expanded cooling
- 4-pin PWM signal split lets both fans run at identical speeds
- Master fan RPM reported back to motherboard for synchronized control
- Black-sleeved 4-inch Y cables keep the build tidy in open cases
- Works with 3-pin and 4-pin fans from Corsair, Cooler Master, Noctua and Thermaltake
Dual 4-Pin PWM Fan Splitter 2-Pack
This 2-pack of Y cables connects two case fans to a single motherboard 4-pin header. Each splitter transmits the PWM signal to both fans so they spin at identical speeds under motherboard software control. The 4-inch black-sleeved cables suit compact builds and open cases.
Synchronised PWM Control and Low-Profile Routing
A master connector passes the RPM signal back to the motherboard while the slave connector omits that pin for tandem operation. Both 3-pin and 4-pin fans are supported, allowing mixed fan types on one header. The short 4-inch length keeps cable runs tidy without excess slack.
Two Splitters for Up to Four Fans Total
The pack provides two independent 1-to-2 splitters, enabling up to four fans from two motherboard headers. Builders needing more than four fans or longer cable runs will need additional splitters or a powered fan hub.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 7,693 items is $14.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Apple |
| Model name | 104040 × 2 |
| Product type | USB 3.0 |
| Product color | Black |
| Display | |
| Refresh frequency | 4 in (10.2 cm) |
| Ports & slots | |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | < 1 in |
| Cable length | 32.8 ft (10 m) |
| Conductor type | Copper Conductor |
| More details | |
| Team affiliation | 2 Piece |
Questions about this item
How do I connect the 4-inch 4-pin PWM splitter to my motherboard header so both fans report speed correctly?
Plug the male 4-pin connector into the motherboard PWM header, attach the primary fan to the female connector that carries the RPM wire, and connect the second fan to the other female connector; the slave leg omits the RPM pin so the board reads one speed signal for both fans.
What upkeep will the black-sleeved copper-conductor splitter need after installation?
No scheduled maintenance is required; simply inspect the sleeved jacket and copper conductors during routine case cleaning and reseat the connectors if any become loose.
At what point does the 4-inch length become a limiting factor in a sustained-build scenario?
The 4-inch reach restricts placement to fans mounted close to the motherboard header; in larger cases or dual-radiator layouts the cable may not span the distance without adding an extension.
More in Internal PSU & Riser Cables
Similar items
Silverstone CPF01 1-to-2 PWM Fan Splitter Cable 3.94 in
- 3.94 in (10 cm)
- Fan Power Cables
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
STARTECH ATXP4EXT 8in ATX12V 4 Pin P4 CPU Power Extension Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





