CableCreation SFF-8643 to 4x SFF-8482 SAS cable 0.5m
Connects a Mini SAS SFF-8643 controller to four SFF-8482 drives with 15-pin power ports
- Connects one SFF-8643 controller to four SFF-8482 drives
- 29-pin connectors with integrated 15-pin power ports
- 5 m length suits compact server chassis
- 6 ft cable reaches nearby backplane bays
- Controller-to-target wiring prevents backplane misconnection
Cable purpose and fit
This internal cable connects a Mini SAS SFF-8643 host controller to four SFF-8482 drives using a 0.5 metre fan-out design. It is built for servers or workstations that need to break out a single x4 controller port into four individual x1 drive links. The assembly includes a 15 pin power port on each drive leg. Buyers whose Mini SAS port sits on a backplane rather than a controller cannot use this cable.
Thermals noise and power
The cable is a passive copper assembly so it adds no active cooling requirement and generates no audible noise. Power for the attached drives is supplied through the integrated 15 pin connectors, drawing from the host system's power distribution. No external power adapter or additional cabling is needed for the drive-side power pins.
What the accessories change
Each of the four drive legs terminates in a 29 pin SFF-8482 connector that carries both data and the 15 pin power interface in one plug. This reduces the number of separate cables inside the chassis compared to using distinct data and power leads. The fixed 0.5 metre length limits routing options to short runs between a controller card and nearby drive bays.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the SFF-8643 end so the controller detects all four drives?
Plug the SFF-8643 connector into the SAS controller or motherboard port labelled Mini SAS host; the four SFF-8482 ends then attach to the drives. The cable will not work if the SFF-8643 port is on a backplane instead of the controller.
What upkeep does the 15-pin power port on each SFF-8482 connector need?
No routine maintenance is required for the 15-pin power port; simply ensure the connector stays fully seated and free of dust. If a pin bends or the latch breaks, replace the entire cable assembly.
At what point does the 0.5 m length become a limit during sustained transfers?
The 0.5 m length meets SAS signal-integrity specs, so the first limit under sustained use is usually the controller or drive throughput, not the cable itself.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA





