Tripp Lite U026-016 USB 2.0 Active Extension Cable 16 ft
- USB A to USB A
- USB 2.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Extends USB 1.1 devices up to 150 feet over Cat5 cable with plug-and-play base and remote units, bus-powered and driver-free
The Cables To Go 29341 kit extends a USB 1.1 connection up to 150 feet using standard Cat5, Cat5E or Cat6 cable. It includes a base unit and a remote unit with four connectors: two USB Type A and two RJ45. The device is bus powered and requires no drivers or external power supply. It suits users who need to place printers, cameras or input devices far from the host computer.
The extender maintains USB 1.1 signalling across the full 150 foot link without signal degradation. Internal DC power conditioning circuits keep voltage stable at the remote device during continuous use. No software or driver layer is involved, so latency and throughput remain consistent for the duration of the session. The link behaves as a direct cable replacement for low-speed and full-speed peripherals.
Bus powered operation means the kit draws all energy from the host USB port and adds no separate heat source. No fans or active cooling are present, so the units run silently in normal use. Power consumption stays within the limits of the USB 1.1 specification for both base and remote modules. The compact black housings dissipate the small amount of heat passively.
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | C2G |
| Model name | 29341 |
| Product type | USB |
| Product color | Black |
| Ports & slots | |
| Connection type | USB A to USB A |
| Connector count | 4 |
| Connector details | One USB A Male & One RJ45 Female to One USB A Male & One RJ45 Female |
| Power | |
| Plug type | Plug Type “A” (USA, Canada, Mexico, Japan) |
| Size & build | |
| Shipping weight | 0.19 kg |
| Package size | 216 × 146 × 38 mm |
The kit is bus-powered and uses internal DC power conditioning circuits to maintain proper voltage to the remote device, so no external power source is required for either the base or remote units.
You need a standard Cat5, Cat5e or Cat6 cable with RJ45 connectors; the kit provides RJ45 female ports on both the base and remote units for that cable.
The extender is compliant with USB Specification 1.1, so a USB 2.0 printer will operate at USB 1.1 speeds rather than its native high-speed rate.
More in USB Cords & Extension Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?