Cables To Go 50210 VGA Cable 1 ft M/M CMG In-Wall
A 1 ft VGA cable with CMG-rated jacket for in-wall installation, HD-15 male connectors on both ends, and full 15-pin wiring for DDC2 and EDID support up to 2048x1536 resolution
- Connector count1
- Connector detailsConnector on First End:1 x HD-15 Male VGA Connector on Secon
- Cable length0.5 ft (0.15 m)
- Product typeCable Connectors
- Product colorBlack
- Overall length1 ft (0.3 m)
- CMG-rated jacket meets in-wall fire-safety codes
- 2048 x 1536 resolution delivers sharp QXGA video
- All 15 pins wired for DDC2 and EDID support
- Low-profile connectors fit tight projector mounts
- One-foot length keeps short runs tidy
In-wall VGA cable for monitors and projectors
The Cables To Go 50210 is a 1 ft male-to-male VGA cable built with a CMG-rated jacket for in-wall installation. It connects monitors, projectors or other video devices using standard HD-15 connectors. The short length suits tight runs inside conduit or behind mounted displays where a CMG rating is required.
Low-profile connectors simplify tight installs
Rounded, low-profile HD-15 ends fit into narrow spaces such as projector mount poles without straining the jack. All 15 pins are wired to carry DDC2 and EDID data so the source can read the display’s capabilities. The CMG jacket meets in-wall fire codes while remaining flexible for routing through studs.
No adapters or software included
The package contains only the cable itself; no drivers, configuration tools or extra adapters are supplied. Compatibility relies on the host and display supporting VGA signalling up to 2048x1536 resolution. Buyers needing longer runs, active signal boosting or digital interfaces such as HDMI or DisplayPort must source those separately.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Pricier than about 60% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | C2G |
| Model name | 50210 |
| Product type | Cable Connectors |
| Product color | Black |
| Ports & slots | |
| Connector count | 1 |
| Connector details | Connector on First End:1 x HD-15 Male VGA Connector on Second End:1 x HD-15 Male VGA |
| Size & build | |
| Overall length | 1 ft (0.3 m) |
| Cable length | 0.5 ft (0.15 m) |
| Shipping weight | 0.07 kg |
| Package size | 140 × 140 × 13 mm |
Questions about this item
How do I install the 1 ft VGA cable in a wall cavity, and what is the common mistake?
Run the CMG-rated jacket through studs or conduit and secure with low-voltage brackets; the mistake is stripping the jacket too far back, which removes the in-wall fire rating.
What maintenance or replacement will the 50210 cable need over time?
Inspect the HD-15 connectors for bent pins and the jacket for abrasion; replace the cable if any pin is damaged or the CMG jacket shows cuts.
At what resolution limit does the cable show its constraint first during sustained use?
The cable supports up to 2048x1536 resolution; beyond that the signal degrades first, so keep the source at or below QXGA.
More in VGA Monitor Cables
Similar items
MECCANIXITY VGA cable 2.7 m 15-pin male-to-male blue black
- VGA
- Male-to-Male
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black





