Cables To Go 50213 VGA Cable M/M 10 ft 2048x1536
A 10 ft VGA cable with male HD-15 connectors on both ends, CMG-rated for in-wall installation and supporting up to 2048x1536 resolution
- Connector count1
- Connector detailsConnector on First End:HD-15 Male VGA Connector on Second En
- Product typeCable Connectors
- Product colorBlack
- Overall length10 ft (3.05 m)
- DetailsDevice Supported:Video Device
- CMG-rated jacket meets in-wall fire safety codes
- Supports 2048 x 1536 resolution for sharp video
- All 15 pins wired for DDC2 and EDID communication
- Low-profile connectors fit tight spaces behind equipment
- 10 ft length covers typical desktop-to-display runs
VGA cable for in-wall video runs
This 10 ft male-to-male VGA cable carries analog video between a source and a display. The CMG-rated jacket meets in-wall fire codes, so installers can route it through walls or ceilings. All 15 pins are connected to pass DDC2 and EDID data for automatic display configuration. It suits offices, classrooms and digital-signage projects needing a permanent link.
Resolution support under continuous use
The cable supports up to 2048x1536 resolution across its full 10 ft length. Signal integrity is maintained during extended sessions because every conductor is wired and the CMG jacket resists heat buildup inside walls. No active electronics are present, so performance does not degrade with time or temperature cycling. The passive design delivers a stable picture for as long as the source and display remain powered.
Straightforward installation with low-profile ends
Low-profile HD-15 connectors fit behind equipment racks and tight wall plates without blocking adjacent ports. Screw-down thumbscrews secure each end by hand, requiring no tools. The only common issue arises if the installer exceeds the 10 ft reach or bends the cable tighter than its jacket allows, which can stress the internal conductors.
How it compares
Measured against everything we stock in VGA Monitor Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 77% of the 1,119 comparable items (median $10.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | C2G |
| Model name | 50213 |
| Product type | Cable Connectors |
| Product color | Black |
| Ports & slots | |
| Connector count | 1 |
| Connector details | Connector on First End:HD-15 Male VGA Connector on Second End:HD-15 Male VGA |
| Size & build | |
| Overall length | 10 ft (3.05 m) |
| Shipping weight | 0.33 kg |
| Package size | 216 × 178 × 25 mm |
Questions about this item
Does the 10 ft length add any signal noise when the cable runs all day?
The cable is a passive copper assembly with no active electronics, so it generates no heat or electrical noise during continuous operation.
What must the buyer already own for this HD-15 male-to-male cable to work?
A video source and a display device each equipped with a 15-pin HD-15 female VGA port.
How does the all-15-pin wiring behave with older monitors that rely on DDC2 or EDID?
All 15 pins are wired, allowing the cable to carry DDC2 and EDID signals that older monitors use for automatic configuration.
More in VGA Monitor Cables
Similar items
Nippon Labs SVGA-15 15 ft SVGA Male to Male cable
- Male to Male
- SVGA
4XEM 4X35MF15 svga cable 15 ft 3.5 mm male to female
- Cable
- Black
Nippon Labs SVGA-25 25 ft SVGA Male to Male cable
- Male to Male
- SVGA





