RCA VHB6111N 100 ft RG-6 coaxial rf cable black
- Digital RG6 Coaxial…
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects 3G-SDI equipment using DIN 1.0/2.3 and BNC-F plugs on Belden 1855A cable, 18 inches long
The Canare 3G SDI DIN 1.0/2.3 to BNC-F adapter cable uses Belden 1855A coaxial construction for professional broadcast links. It carries 3G SDI signals across an 18 inch run between equipment with mismatched panel connectors. The male DIN 1.0/2.3 and male BNC-F ends provide a direct, soldered connection without intermediate couplers.
Suited for installers fitting Red One cameras, Harris X50 routers or AJA, Nevion, Miranda, 3COM, Cisco and RED ONE gear into crowded bays or mobile trucks. The slim Belden 1855A RG59 profile saves space where multiple patch cables run side by side. Not for users needing longer runs, different connector genders or cable types outside the listed specifications.
The double-shielded Belden 1855A centre conductor maintains 50 ohm impedance and low attenuation during continuous 3G SDI transmission. Shielding rejects EMI in dense rack environments so the eye pattern stays clean over full production shifts. Connectors are crimped to broadcast-grade standards, resisting signal degradation from repeated mate cycles in daily use.
Measured against everything we stock in Coaxial RF & Antenna Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
This cable plugs into devices with a DIN 1.0/2.3 port such as Red One cameras, Harris X50 routers, or AJA, Nevion, Miranda, 3COM, Cisco broadcast gear.
Yes, the male BNC-F connector fits traditional BNC sockets on older routers, monitors and switchers, so existing 50 or 59 ohm coax infrastructure works unchanged.
Check for a stable 3G SDI lock on the receiving device with zero bit errors or video dropouts; the Belden 1855A shielding should keep the feed clean.
More in Coaxial RF & Antenna Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?