COMMSCOPE HomeConnect Digital Coaxial Splitter SV-2G 2-way 5-1002 MHz 75 ohm Pack of 3
A pack of three two-way coaxial splitters covering 5–1002 MHz at 75 ohm for indoor or outdoor use
- Product colorRed
- Product weight0.35
- Three splitters in one pack simplify multi-room installs
- 5–1002 MHz bandwidth supports cable TV, broadband and MoCA signals
- 5 dB insertion loss up to 550 MHz keeps signal strong
- 120 dB minimum shielding blocks external interference
- Surge tested to ANSI/SCTE 81 Category A3 for outdoor durability
Three-pack coaxial splitter
The CommScope HomeConnect SV-2G is a two-way digital coaxial splitter supplied in a pack of three units. Each splitter operates across a 5–1002 MHz frequency band with a 75 ohm impedance, making it suitable for distributing cable TV, antenna or broadband signals to two outlets in residential or light-commercial installations.
Indoor or outdoor installation
The splitters are rated for both indoor and outdoor use and require no external power, so they can be mounted at the point of entry or at any convenient junction without a nearby socket. With a minimum shielding effectiveness of 120 dB and surge capability tested to Category A3 (6 kV, 200 A ring wave) per ANSI/SCTE 81, they maintain signal integrity even in electrically noisy environments.
Signal performance and limits
Typical insertion loss is 3.5 dB from 5–550 MHz and 4.0 dB from 550–1002 MHz, while return loss measures 22 dB at 50–1002 MHz and 25 dB at 5–45 MHz on both input and output ports. Frequency response stays within ±0.3 dB and second-order harmonics remain below -60 dBc before surge testing. The devices do not pass DC power, so they cannot be used to feed remote amplifiers or LNBs that rely on upstream voltage.
How it compares
Measured against everything we stock in HDMI, VGA & USB Splitters, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 93% of the 232 comparable items (median $17.99).
Specifications
| Product | |
|---|---|
| Brand name | Commscope |
| Model name | SV-2Gsplitter3pack |
| Product color | Red |
Questions about this item
What insertion loss should I expect across the 5–1002 MHz range on the SV-2G?
The splitter typically inserts 3.5 dB loss from 5–550 MHz and 4.0 dB from 550–1002 MHz.
How much heat or noise does the SV-2G generate when used continuously?
As a passive coaxial splitter with no active electronics, it produces no heat and makes no audible noise.
What coaxial cables and connectors do I need to use these three splitters?
You need 75 ohm coaxial cables with F-type connectors on each end to match the splitter ports.
More in HDMI, VGA & USB Splitters
Similar items
Antronix CMC2004U 4-Way Universal MoCa Splitter -3.5dB -7dB 5-1002 MHz
- Black
Holland Electronics HFS-2D 2-Way Diode Steered Splitter 5-2150 MHz
- Gold
ATEN VS172 2-Port DVI Dual Link Splitter with Audio
- DVI
- Connectors, Video I…
Extreme Broadband Engineering BDS102VF 2-Way Digital Coaxial Vertical Splitter
- Silver





