Corn Electronics 7000rpm 80mm 4Pin PWM case fan
80 mm case fan with double ball bearing and 4-pin PWM speed control up to 7000 rpm
- Fan size80 mm
- LED lightingNon-LED
- Product typeCase Fan
- Product colorBlack
Model 7000rpm
- 7000rpm$15.99
- 10000rpm$14.99
- Double ball bearing reduces wear for longer service life
- 7000 rpm maximum speed delivers strong airflow when needed
- 4-pin PWM control adjusts speed automatically with system load
- 80 mm by 38 mm frame fits standard mounting points
- 12 V DC power with 0.5 A typical draw keeps energy use low
Product Identity
The Corn Electronics S8038-7K is an 80 mm case fan that uses a four-pin PWM connector and runs on 12 V DC. It spins at up to 7000 rpm and weighs 151 g. Double ball bearings support the motor shaft. The frame is black and carries no LED lighting.
Suitability
This fan fits cases and coolers that accept an 80 mm by 38 mm mounting pattern and a four-pin header. It suits users who want PWM speed control and a double ball bearing design. Buyers who need a larger frame size or a different voltage should look elsewhere.
Deciding Specification
The maximum speed of 7000 rpm is the figure that determines whether this fan delivers the airflow you require. Match it against the thermal target of your build before ordering.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 63% of the 8,338 comparable items (median $19.99).
- Fan size 80 mm
- Lower than about 75% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
| Size & build | |
| Fan size | 80 mm |
| More details | |
| LED lighting | Non-LED |
Other versions of this model
1 more in the same range
Questions about this item
How loud and hot does the 7000rpm 80mm fan run during continuous operation?
At maximum speed the 80mm fan spins at 7000rpm using double ball bearings; power draw is 0.5A typical and 1.3A peak on 12V, so heat output scales with the load you apply.
What connector and voltage does the 4Pin PWM 80mm fan require from my motherboard?
It needs a standard 4-pin PWM header supplying 12V DC; the board must provide up to 1.3A for full-speed operation.
Will the 80x80x38mm S8038-7K fit the mounting holes on my older 80mm chassis?
Yes — the frame is exactly 80mm square and 38mm thick, matching the legacy 80mm screw pattern used on older cases.
More in PC Cooling Fans
Similar items
Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
Corsair RS120 PWM 120mm case fan CO-9050188-WW 25mm Magnetic Dome bearing
- 120 mm
- 1 Fan
Phanteks PH-F120M25_G2_DWT01 120mm 25mm ARGB case fan
- 1 Fan
- No Controller
COUGAR CF-V12H 120mm case fan 1200 RPM 60.4 CFM 17.7 dB Hydro-Dynamic 25mm Orange
- 1 Fan
- No Controller






