Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 120 mm hydro-bearing fan moves 38 CFM at 1500 RPM while running at 23.5 dBA and adds a blue LED halo ring
The Corn Electronics Aurora 120 Angel Eye is a 120mm case fan built for PC builders who want blue LED illumination and a hydro bearing. It suits standard case mounting points and draws power from either a motherboard 3-pin header or a Molex LP4 connector from the power supply. Buyers who need PWM speed control or addressable RGB synchronisation should look elsewhere.
The fan spins at 1500 RPM with a ±10% tolerance and pushes 38 CFM of airflow at a static pressure of 1.3 mmH2O. Acoustic output is rated at 23.5 dBA, which is quiet enough for typical desktop use. Power is supplied at 12 VDC through the chosen connector; the supplier warns that connecting both the 3-pin and LP4 plugs simultaneously may cause a short circuit.
The frame measures 120 x 120 x 25 mm and weighs 150 g (0.33 lb). A hydro bearing provides a rated 20,000-hour MTTF. Translucent blades and a halo ring create the blue lighting effect. Four mounting screws and anti-vibration pads are included to reduce transmitted vibration. Only one power connection type should be used at any time.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | 1500 |
| Airflow rate | 38CFM |
| Power | |
| Power input connector | 3-pin/LP4 |
| Size & build | |
| Bearing design | Hydro Bearing |
| Product dimensions | 120 × 120 × 25 mm (4.7 × x 4.7 × 1 in) |
| Compatibility | |
| Compatible with | Case |
| In the box | |
| In the box | • 1 x Cooling Fan • 4 x Mounting Screws |
| Environment & compliance | |
| Operating noise | 23.5 dBA |
| More details | |
| LED lighting | Blue |
Mount the 120 mm fan with the four included screws and connect either the 3-pin header to the motherboard or the LP4 connector to the PSU — never use both at the same time or you risk a short circuit.
The hydro bearing is sealed for its 20000-hour MTTF; once noise or vibration rises past the specified 23.5 dBA the whole fan should be replaced because the bearing is not user-serviceable.
Bearing life is the limiting factor; the hydro bearing is rated for 20000 hours at 1500 RPM, while airflow stays at 38 CFM and noise at 23.5 dBA throughout that period.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?