We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

CORN

Corn Electronics PH-NELEDKT_M5 550mm 38 LED filament

SKU CH-DK7V-HC5K2 MPN PH-NELEDKT_M5

A 550 mm ARGB strip with 38 addressable LEDs and a 5 V 3-pin connector for motherboard sync

  • 550 mm strip spans large cases with 38 addressable LEDs
  • KS6812 chip drives full colour ARGB effects
  • 5 V 3-pin connector plugs straight into compatible motherboards
  • Nine strong adhesive pads secure the 13 × 5.5 mm bar
  • Rated 20000-hour MTBF for long-term illumination

Targeted Illumination Kit

The Corn Electronics PH-NELEDKT_M5 is a 550 mm addressable LED filament designed for ARGB Symphony chassis, controllers and motherboards with a 5 V 3-pin header. Thirty-eight KS6812 LEDs provide full-colour digital RGB output across the strip length. Nine adhesive pads secure the flexible bar to motherboards, graphics cards or case panels for custom lighting layouts.

Capacity and Headroom

Thirty-eight individually addressable LEDs cover the 550 mm length with consistent colour mixing and smooth transitions. The 5 V supply limits total current draw, so very long daisy-chained runs may exceed the header rating and require a powered controller. The strip is built for standard chassis accent lighting rather than high-density matrix panels.

Thermals Noise and Power

Solid-state LEDs produce negligible heat during normal operation and run completely silently. Rated MTBF of 20000 hours indicates long-term reliability at the specified 5 V input. Power consumption scales with brightness and colour choice but remains well within typical motherboard 5 V 3-pin header limits for a single strip.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 75% of the 305 comparable items (median $27.99).

New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Will the 550 mm strip fit alongside my existing 5 V 3-pin ARGB header?

The strip draws 5 V through a standard 3-pin 5 V header, so it connects directly to the same header your current ARGB devices use.

How can I verify the KS6812 Symphony LEDs are running correctly after installation?

Each of the 38 LEDs should display smooth, full-colour transitions without flicker when driven by a compatible 5 V 3-pin controller.

Does the kit include the 600 mm motherboard adapter and the 9 adhesive pads, or must I buy them separately?

The package supplies the 550 mm LED bar, a 600 mm digital-RGB motherboard adapter, a 3-pin chassis controller and 9 adhesive pads for mounting.

More in 3D Printer Filament

Similar items