Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB quad-channel DDR5 kit with four 16 GB ECC registered modules running at 5600 MT/s CL40 and 1.25 V
This 64 GB kit contains four 16 GB registered DIMMs built for workstation platforms that require ECC integrity. Each module runs at DDR5 5600 with CL40 timings and a 1.25 V operating voltage. The quad-channel population fills four slots at once, delivering high bandwidth for memory-intensive workloads.
Registered DDR5 modules operate at 1.25 V, keeping power draw modest under sustained compute loads. The integrated heatspreader dissipates heat across the PCB so temperatures remain stable during long renders or simulations. No active cooling is required; typical case airflow is sufficient for normal operation.
The 288-pin RDIMM form factor fits standard DDR5 server and workstation motherboards that support registered ECC memory. Intel XMP 3.0 allows the rated speed and timings to be applied with a single BIOS setting. Kits scale from 64 GB up to 256 GB, leaving headroom for future capacity expansion.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | CORSAIR |
| Product line | WS RDIMM Series |
| Part number | CMA64GX5M4B5600C40 |
| Total capacity | 64 GB (4 × 16 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | INTEL XMP 3.0 |
| Memory | |
| CAS latency | CL40 |
| Memory timings | 40-40-40-77 |
| ECC support | Yes |
| Buffer type | Registered |
| Kit configuration | Quad Channel Kit |
| Power | |
| Rated voltage | 1.25 V |
| Size & build | |
| Shipping weight | 0.09 kg |
| Package size | 160 × 78 × 20 mm |
Align the notch on each 288-pin DDR5 RDIMM with the slot key, press firmly until both retention clips click, then enable Intel XMP 3.0 in BIOS so the kit runs at DDR5 5600 CL40 instead of the default JEDEC speed.
No routine maintenance is required; the modules are screened for stability at 1.25V. If a module fails, replace it with an identical 16GB DDR5 5600 CL40 registered ECC stick to keep quad-channel timing 40-40-40-77 intact.
The CAS latency CL40 and 40-40-40-77 timing set the latency floor; under continuous load the 1.25V operating voltage and registered buffer keep signal integrity stable up to the rated DDR5 5600 speed.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?