We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cudy

Cudy POE300 60W Gigabit PoE+ Injector

SKU CH-BZYT-9M36M MPN POE300

Wall-mountable PoE+ injector adds up to 60 watts of power over a Gigabit Ethernet link up to 328 feet

  • Product typePoE Injector
  • Product colorBlack
  • DetailsForm Factor: Wall-Mountable Wattage: 60 W Cooling Method: Ai
  • Key features1 Gigabit Ethernet port input and 1 PoE+ Gigabit Ethernet po
  • Delivers up to 60 watts to power hungry PoE+ devices
  • Auto-sensing supplies 30 watts or 15.4 watts for older PoE gear
  • Single Gigabit input and PoE+ output give full duplex 2Gbps throughput
  • Wall-mountable design with fan cooling fits tight installation spaces
  • Plug-and-play operation needs no configuration for quick deployment

60W PoE+ injector for Gigabit networks

The Cudy POE300 is a wall-mountable PoE injector that supplies up to 60 watts over a single Gigabit Ethernet cable. It accepts 100 to 240 volts AC and draws .5 amps while an internal fan provides air cooling. Installers who need to power a compatible access point or camera without a PoE switch will find it fits the requirement.

Auto-sensing 802.3at output with legacy support

Auto-sensing technology delivers up to 802.3at 60W to a PoE+ device and remains backwards compatible with 802.3at 30W and 802.3af 15.4W equipment. Pin assignment follows 1/2 (-), 3/6 (+), 4/5 (+), 7/8 (-) so power arrives on the correct pairs. The unit does not support 802.3bt PoE++ or any passive PoE devices, so hardware requiring those standards cannot be powered.

100 metre reach for a single powered device

One Gigabit input port and one PoE+ output port provide full duplex 2Gbps Ethernet speeds across a 100 metre (328 ft) cable run. The injector converts a non-PoE Gigabit port into a PoE+ port for a single device; it cannot supply power to multiple endpoints or to gear that demands more than 60 watts. Plug-and-play operation means no configuration is required for supported installations.

How it compares

Measured against everything we stock in Patch Panels, PoE & LAN Adapters, at today’s prices. Recalculated every night.

Price $42.99
Cheaper than about 59% of the 556 comparable items (median $56.99).

New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameCudy
Model namePOE300
Product typePoE Injector
Product colorBlack

Questions about this item

Will the internal fan on the POE300 need to be cleaned or replaced after long-term use?

The injector uses a single fan for air cooling; keeping the vents clear of dust will maintain airflow and extend the fan's life.

What limits the POE300 when it powers a device continuously at the full 60 watts?

The 60-watt output ceiling is the first limit reached; the injector auto-senses and will not exceed 802.3at 60W.

How much heat and noise does the POE300 produce when running 24/7?

With one fan and air cooling at 0.5 amps, it emits a low fan hum and modest warmth typical of a 60-watt injector.

More in Patch Panels, PoE & LAN Adapters

Similar items