We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cudy

Cudy POE400 90W PoE++ Injector

SKU CH-XKM7-FWAHM MPN POE400

Delivers up to 90 W to PoE++ devices over 100 metres with Gigabit data rates

  • Product typePoE Injector
  • Product colorBlack
  • DetailsCompatible Devices: IP Phone, Surveillance Camera, Wireless
  • Key featuresGigabit PoE Injector, 1 Gigabit Ethernet port input and 1 Po
  • Delivers up to 90W for power-hungry PoE++ devices
  • Backwards compatible with 60W, 30W and 15.4W PoE standards
  • Gigabit Ethernet input and output provide full duplex 2Gbps throughput
  • Powers devices up to 100 meters away over a single cable
  • Plug-and-play operation with auto-sensing technology requires no configuration

Cudy POE400 90W PoE++ Injector

This injector adds Power over Ethernet to a non-PoE Gigabit port. It serves IP phones, surveillance cameras and wireless access points that need up to 90 W of power. The unit accepts 240 V mains input and operates up to 40 °C. It is built for small installations where running separate power cables is impractical.

Plug-and-play installation with auto-sensing

Connect the injector between your switch and the powered device using standard Ethernet cable up to 100 m. Auto-sensing detects the connected device and negotiates the correct power class without any configuration. The only common issue is exceeding the 90 W budget or the 40 °C ambient limit, which will cause the unit to shut down or throttle.

90 W maximum with backwards compatibility

The injector delivers up to 90 W for 802.3bt four-pair devices, 60 W for 802.3bt/at four-pair, 30 W for 802.3at two-pair and 15.4 W for 802.3af equipment. Gigabit data runs at 1000 Mbps full duplex across the link. It cannot power devices that need more than 90 W or operate beyond the 100 m cable reach.

How it compares

Measured against everything we stock in Patch Panels, PoE & LAN Adapters, at today’s prices. Recalculated every night.

Price $64.99
Typical for this category: the median of 556 items is $56.99.

New to this? Buying networking gear with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameCudy
Model namePOE400
Product typePoE Injector
Product colorBlack

Questions about this item

How do I verify the POE400 is delivering power correctly after connecting a device?

The injector auto-senses the connected device and supplies up to 90W for PoE++, 60W for 802.3bt/at 4-pair, 30W for 802.3at 2-pair, or 15.4W for 802.3af; the device should power on and pass data at Gigabit speed up to 100 meters.

What cables or accessories are included with the POE400 and what must I provide?

The unit includes the PoE++ injector only; you must supply two Ethernet cables — one from your switch to the data input port and one from the PoE output port to the IP phone, camera or access point.

Which PoE standard should I match when choosing a device for this 90W injector?

Select a device that supports 802.3bt PoE++ for the full 90W; the injector also works with 802.3bt/at 4-pair (60W), 802.3at 2-pair (30W) and 802.3af (15.4W) equipment.

More in Patch Panels, PoE & LAN Adapters

Similar items