CY HX-SA-117 Dual SATA 15Pin to PCIe 6Pin internal power cable
Converts two SATA 15-pin power connectors into a single PCIe 6-pin plug for graphics cards
- Refresh frequency10 cm
- First connector1x 4-pin PWM
- Second connector1x 12VHPWR PCIe Gen5 female
- Connector genderMale to Female
- Conductor typeCopper Conductor
- Product typeExtension Cable
- Powers PCIe 6-pin graphics cards from dual SATA 15-pin connectors
- Supports DC 5V and 12V delivery for EPS 12V graphics cards
- Uses copper conductors for reliable internal power transmission
- Compact 10cm length fits tight chassis routing
- Lightweight 0.02 kg design adds minimal mass to builds
Dual SATA to PCIe 6-Pin Adapter
This internal power cable converts two SATA 15-pin connectors into a single PCIe 6-pin plug. It allows a graphics card requiring PCIe power to run from a power supply that lacks native PCIe connectors. The adapter supports both 5V and 12V DC power delivery through copper conductors.
Upgrade Path for Non-PCIe Power Supplies
The cable replaces the need for a new power supply when installing a PCIe video card into an older system. It is worth using when the existing PSU has sufficient wattage and two spare SATA power lines on separate rails. It does not suit builds where the PSU lacks the required spare SATA connectors or total power headroom.
Pre-Installation Checks
Verify that your power supply offers two unused SATA 15-pin connectors, preferably on different cables. Confirm the graphics card requires a single 6-pin PCIe power input. Ensure the 10cm cable length reaches between your PSU and the installed card without strain.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 80% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Apple |
| Model name | HX-SA-117 |
| Product type | Extension Cable |
| Product color | Black |
| Display | |
| Refresh frequency | 10 cm |
| Ports & slots | |
| First connector | 1x 4-pin PWM |
| Second connector | 1x 12VHPWR PCIe Gen5 female |
| Connector gender | Male to Female |
| Size & build | |
| Conductor type | Copper Conductor |
Questions about this item
How much clearance do the two SATA 15-pin connectors need behind the power supply?
The cable is 10 cm long, so allow at least that depth plus room for the two 15-pin plugs to seat without bending sharply.
Which end plugs in first when converting dual SATA power to a PCIe 6-pin graphics card?
Connect the two SATA 15-pin plugs to separate power-supply cables first, then attach the PCIe 6-pin end to the graphics card.
Will the copper conductors inside need replacement after a certain period?
No, the copper conductors are rated for the life of the cable; only replace the adapter if the connectors become loose or show physical damage.
More in Internal PSU & Riser Cables
Similar items
Ruth's sister 25mm Large Diaphragm Cartridge Core Capsule internal power cable
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Ruth's sister USB-C Female to 4.0x1.7mm DC Adapter for Lenovo IdeaPad 310 110 100 internal power cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





