Darkside 4-PIN Molex + RPM to 3-PIN Fan Conversion Cable 30cm Jet Black Sleeved
Converts a 4-pin Molex power connector with RPM signal to a 3-pin fan header for motherboard or controller use, 30 cm sleeved length
- Cable length1 ft (0.3 m)
- Connect Molex devices to 3-pin headers for flexible cooling control
- 30 cm jet-black sleeved cable keeps builds tidy and airflow clear
- RPM wire included so fan speed reports to motherboard or controller
- 12-inch length suits compact and mid-tower chassis layouts
- Observe 36 W header limit to protect motherboard from overload
Adaptor for Molex device to 3-pin header
This 30 cm sleeved cable converts a four-pin Molex connector with RPM wire into a three-pin fan header connection. It lets builders power a Molex device from a motherboard or fan-controller header without cutting or splicing wires. The jet-black sleeve keeps the run tidy inside the case.
Steady power within header limits
The adaptor passes power continuously from the Molex source to the three-pin header, so the load is limited by the header's own rating rather than the cable itself. The supplier warns that a device drawing 36 W on a header would damage the motherboard, while lighter loads such as LED strips remain safe. Sustained operation therefore depends entirely on staying within the header's unspecified current ceiling.
Simple plug-in with one clear risk
Installation is a straight push-fit: Molex plug into the device, three-pin plug onto the header, with no tools or software required. The only common mistake is ignoring the power warning and connecting a high-draw pump or similar load that exceeds what the header can supply. Verifying the device wattage before plugging in avoids that failure.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $2.99
- Cheaper than about 97% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 1 ft (0.3 m) |
Questions about this item
Does the 30 cm cable add any electrical resistance that could affect fan RPM readings?
The 30 cm length adds negligible resistance; the RPM wire passes through unchanged so the motherboard or controller sees the true fan speed.
What must my motherboard or fan controller provide for this adapter to work?
A standard 3-pin fan header rated for the attached device's current draw; the adapter simply bridges Molex power and the RPM signal to that header.
Can I keep using an older Molex-powered fan with this cable on a modern 3-pin header?
Yes, the 4-pin Molex plug with RPM wire connects the fan to the 3-pin header, but confirm the fan's power draw stays within the header's rating.
More in Internal PSU & Riser Cables
Similar items
Qinghai Electronics 20 Piece Cable Comb Set Pink 24-pin x 4 8-pin x 16
- Pink
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Qinghai Electronics 20-Piece Cable Comb Set Gun Metal Gray 24-pin x4 8-pin x16
- Grey
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Qinghai Electronics 20-Piece Cable Comb Set — 24-pin ×4, 8-pin ×16, White
- White





