Darkside Computer Modding 4+4 EPS 12" HSL Single Braid Extension Cable Commando UV Green DS-0704
A 12-inch EPS 4+4 pin extension with UV-green single-braid sleeving for custom cable routing
- Cable length1 ft (0.3 m)
- Extends CPU power reach with 12 inch length
- UV green braid glows under blacklight for visual impact
- Single braid sleeve protects wires and eases routing
- 4+4 pin EPS connector fits standard motherboard headers
- Designed and produced in Canada for modder-grade quality
12-inch EPS Extension Cable
This Darkside Computer Modding cable adds 30 cm of reach to a 4+4-pin CPU power connector. It uses a single braided sleeve in a Commando UV Green finish for a clean look inside the case. The extension is designed and produced in Canada for modders who want reliable power delivery with a custom appearance.
Simple Plug-and-Play Installation
The cable connects between the existing PSU lead and the motherboard socket without tools or soldering. Align the 4+4-pin plugs carefully to avoid bent pins, which is the most common issue during fitting. Ensure the latch clicks fully on both ends so the connection stays secure under load. Route the braided length away from sharp edges to protect the sleeve.
For Builders Extending CPU Power Runs
This extension suits anyone lengthening an EPS cable for a rear-routed or large-chassis build. It is not for users who need a 24-pin ATX, PCIe or Molex extension, as this model only covers the 4+4-pin CPU connector. Buyers requiring a different connector type or a longer reach should look at other cables in the Darkside range.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 1 ft (0.3 m) |
Questions about this item
How can I confirm the 4+4-pin EPS extension is delivering power correctly after routing it?
The system will POST and the CPU will receive stable 12 V power; if the board lights up and boots into BIOS, the cable is functioning as intended.
What comes with the DS-0704 and what must I supply?
The package includes one 12-inch HSL single-braid 4+4-pin EPS extension in Commando UV Green; you must provide the existing PSU EPS cable and a compatible motherboard 8-pin CPU socket.
Which length should I choose for a mid-tower build?
The 12-inch (30 cm) version suits most mid-tower layouts; longer runs would require a different SKU not covered by this model.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





