Darkside Computer Modding CONNECT 3-Way Molex Splitter Cable 4 in DS-0395
A 4-inch, three-way Molex splitter that powers three LED devices from one header
- Cable length4 in (10.2 cm)
- Connects three LEDs to one 4-pin Molex header
- 4-inch length keeps custom builds tidy
- Universal DarkSide Connect design fits modding LED setups
- Swap connectivity without replacing the LED unit
- Reduces cable clutter inside the chassis
3-Way Molex Splitter Cable 4 in
The Darkside Computer Modding CONNECT DS-0395 is a 4-inch internal power cable that splits one 4-pin Molex connector into three. It is built for modders who want to run multiple LED strips or fans from a single motherboard or fan-controller header while keeping cable runs short and tidy.
Modders adding several LEDs to one header
This splitter suits builders who need to power three 4-pin Molex devices from one source in a compact custom loop or air-cooled build. It is not for systems that require longer cable runs between components or installations where the power source lacks a standard 4-pin Molex output.
4-inch length
The cable measures 4 inches (10 cm) end to end, so the three branches stay close to the splitter body. Verify that this reach matches the spacing of your LED strips or fans before ordering.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $1.99
- Cheaper than about 98% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 4 in (10.2 cm) |
Questions about this item
Does the 4-inch DS-0395 splitter include the three LED devices or just the cable?
Only the 3-way Molex splitter cable is included; LEDs, motherboard headers or fan controllers must be purchased separately.
When should I choose the Type 11s 3-way version instead of a straight-through cable?
Choose this splitter when you need to run three LEDs from one Molex header; a straight cable only supports a single device.
What does the 10 cm length mean for routing inside a typical case?
The 10 cm reach suits tight motherboard-to-fan-controller runs but will not stretch across a full-size chassis.
More in Internal PSU & Riser Cables
Similar items
Phobya 6-pin VGA Connector Ver. 1 incl. pins 2ct Male 82379
- Black
- Two sets of Phobya…
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Phobya 6-pin VGA connector 2-pack female 82356
- Black
- Two sets of 6-pin f…
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





