Darkside Computer Modding DS-0819 Molex 4-pin to dual 3-pin Y-cable 12V 30cm Black
Splits a single 4-pin Molex connector into two 3-pin fan headers using only 12 V feed wires across 30 cm of black cable
- Product colorBlack
- Key featuresSimple power Y-cable from 4-pin MOLEX connector to dual 3-pi
- Powers two 3-pin fans from one Molex connector
- 12 V feed wires deliver consistent voltage to both fans
- 30 cm length fits tidy internal routing
- Black sleeving blends with dark-themed builds
- Molex passthrough preserves the connector for other devices
Purpose and Audience
The Darkside DS-0819 is a 30cm internal power Y-cable that splits a single 4-pin Molex connector into two 3-pin fan headers. It is intended for PC builders who need to run two 3-pin fans from one Molex output on a power supply. The cable carries only the 12V feed wires, delivering fixed full-speed power to attached fans.
Who This Suits and Who It Does Not
This cable suits builders adding case fans to a system with spare Molex connectors and no remaining motherboard fan headers. It is not for users who need PWM speed control, voltage regulation or a 5V supply line for 3-pin devices that require lower voltage. Buyers wanting fan-speed management should look at a motherboard header or a dedicated fan controller instead.
Deciding Specification
The critical detail is that the cable provides only a 12V feed to the two 3-pin connectors. Because the 5V and ground regulation wires are absent, every connected fan will run at its maximum rated speed continuously. Confirm that your fans are designed for constant 12V operation before purchasing.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $1.99
- Cheaper than about 98% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Darkside |
| Model name | DS-0819 |
| Product color | Black |
Questions about this item
What connectors does the DS-0819 Y-cable include and is anything else needed?
The cable has one 4-pin Molex plug with a passthrough and two 3-pin fan headers; no extra parts are required.
How do I pick the right version or length of this Molex-to-dual-3-pin cable?
Only one version exists — model DS-0819, 30 cm long, black, carrying 12 V only.
What does the 12 V rating mean when I plug two fans into this cable?
Both 3-pin headers receive a straight 12 V supply from the Molex source, so connected fans run at full speed.
More in Internal PSU & Riser Cables
Similar items
Phobya 6-pin VGA Connector Ver. 1 incl. pins 2ct Male 82379
- Black
- Two sets of Phobya…
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Phobya 6-pin VGA connector 2-pack female 82356
- Black
- Two sets of 6-pin f…
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





