Darkside DS-0961 4-Pin MOLEX HSL Extension Single Braid Cable Gun Metal
A 4-pin MOLEX extension cable with heat-shrink-less single braid sleeving in gun metal
- Key featuresThis Revision of Dazmode’s DarkSide cables features NO heats
- Cleaner cable routing with no heatshrink bulk
- Flexible single-braid sleeve eases tight bends
- Modder-preferred HSL design reduces connector strain
- Male-to-female 4-pin Molex extends existing runs
- Gun-metal finish matches dark-themed builds
Extension cable for Molex power
The Darkside DS-0961 is a male-to-female Molex extension built with a single braid sleeve and no heatshrink. It suits modders who want a clean look inside the case without the bulk of traditional sleeving. The gun-metal finish matches dark-themed builds.
Heat-shrink-less construction under load
Removing the heatshrink layer reduces insulation thickness so the cable bends more easily around tight corners. The single braid still protects the conductors from abrasion while allowing better airflow around the wires during sustained power draw.
Simple push-fit installation
Each end uses standard Molex connectors that click into existing power leads without tools. The stiff braid can spring back if not routed with a gentle curve, so plan the path before seating the plugs.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $2.99
- Cheaper than about 97% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Darkside |
| Model name | DS-0961 |
Questions about this item
Does the single-braid sleeving on the DS-0961 affect airflow or heat around my Molex power connectors?
The heatshrink-less single braid leaves more space around the 4-pin Molex plugs, so cables sit flatter and do not trap heat against nearby components.
What connectors must already be on my power supply and devices for this DS-0961 extension to work?
You need a standard 4-pin Molex male lead from your PSU and a matching 4-pin Molex female port on the drive or fan you are powering.
Will the gun-metal braid on this DS-0961 clash visually with older white or clear Molex cables I plan to keep?
The dark gun-metal sleeve gives a uniform stealth look that contrasts with legacy white or transparent cables, so mixed runs will be noticeable.
More in Internal PSU & Riser Cables
Similar items
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Darkside DS-0959 4-Pin MOLEX HSL Extension Single Braid Cable Orange
- Orange
- This Revision of Da…
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Darkside DS-0965 4-Pin 70cm PWM Fan Cable White
- White
- Compliment your bui…





