Darkside Three-Way Fan Splitter Cable SATA Power 40cm DS-0931
Connects three PWM or 3-pin fans to a single SATA power source with 40 cm jet-black sleeved cables
- Cable length1.3 ft (0.4 m)
- Connect three fans from one SATA port
- Powers 12 V to all three fans simultaneously
- 40 cm length fits compact builds
- Jet-black sleeving protects wires and looks clean
- Accepts both 4-pin PWM and 3-pin fan connectors
Three-Way Fan Splitter with SATA Power
This 40 cm cable splits a single SATA power connector into three 4-pin PWM fan headers. It supplies 12 V to all connected fans at once. The black-sleeved wiring keeps the loom tidy inside the case. 3-pin fans also fit the 4-pin housings.
Builders Adding Multiple Case Fans
Ideal for anyone running several chassis fans from one SATA lead on the power supply. It removes the need for motherboard fan headers when only power is required. Not suited for setups that need per-fan speed reporting or motherboard-controlled PWM curves.
SATA-Powered Triple Header
The SATA plug draws power directly from the PSU, bypassing motherboard current limits. Three fans spin up together from one cable, reducing clutter. No software or extra adapters are included.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 94% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Cable length | 1.3 ft (0.4 m) |
Questions about this item
What power connector must my PSU provide to run this 40 cm splitter?
Your power supply needs a free SATA power connector to feed the 12 V line that drives all three fan headers.
Can I plug my older 3-pin fans into the 4-pin headers on this cable?
Yes, the 4-pin housings accept 3-pin fan plugs directly; the fans will run at full 12 V speed without PWM control.
How can I verify the splitter is delivering power to all three fans after installation?
Power on the system and confirm each connected fan spins up; all three should start together from the single SATA source.
More in Internal PSU & Riser Cables
Similar items
STARTECH TX3SPLITTER 6.1 in TX3 Fan Power Splitter Cable
- 0.5 ft (0.15 m)
- Cable Connectors
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors 6-Pin PCIe to Dual 15-Pin SATA Power Cable
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…





