Star Micronics 39607804 Ethernet Interface Board pos accessory
- Printer Interface C…
- Printer Interface C…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
RS-232 serial cable, six feet long, connects the Gryphon I GBT4100 to a host system
This six-foot cable connects a Datalogic Gryphon I GBT4100 scanner to a host system using a standard RS-232 serial link. It is built for point-of-sale environments where reliable wired communication is required. The part number 90G001092 identifies the exact accessory for this device family.
The cable carries a DB-9 style connector on the host side and a modular plug for the scanner cradle, allowing a secure fit that resists accidental disconnection during checkout traffic. A six-foot run gives enough slack to route the wire along a counter or through a stand without stretching. The moulded strain relief protects the solder joints from repeated flexing at both ends.
This accessory works only with the Gryphon I GBT4100 model; it will not fit other Gryphon series scanners or third-party hardware. Verify the scanner part number before ordering to avoid a mismatch. No driver installation is needed because the link uses the native RS-232 protocol supported by the host application.
Measured against everything we stock in POS Peripherals & Supplies, at today’s prices. Recalculated every night.
New to this? Buying a printer and toner with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Datalogic |
| Part number | 90G001092 |
| Product type | Cable |
| Size & build | |
| Cable length | 6 ft (1.83 m) |
| Shipping weight | 0.09 kg |
| Package size | 152 × 127 × 25 mm |
| Compatibility | |
| Compatible with | Gryphon I GBT4100 |
The cable follows the RS-232 serial specification for point-of-sale connections to the Gryphon I GBT4100.
It plugs into the serial port on the Gryphon I GBT4100 scanner base.
Connect the DB-9 end to the host and the modular end to the GBT4100 base, then secure the thumbscrews.
More in POS Peripherals & Supplies
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?