DBTLAP CPU Cooling Fan for HP Pavilion 15-ab263ca 15-ab283nr 15-ab292nr 15-ab293cl
Replacement CPU cooling fan compatible with HP Pavilion 15-ab263ca, 15-ab283nr, 15-ab292nr and 15-ab293cl laptops
- Accessory categoryCooler
- Direct replacement for HP Pavilion 15-ab series laptops
- Tested individually before shipping to ensure 100% operation
- Sourced from Forcecon, ADDA, Sunon or Kipo manufacturers
- Single fan unit included in the package
- 9-month warranty provided by the supplier
Replacement CPU Fan for HP Pavilion 15 Series
This new cooling fan replaces the original CPU cooler in HP Pavilion 15-ab263ca 15-ab283nr 15-ab292nr and 15-ab293cl laptops. It is built for owners whose factory fan has become noisy or stopped spinning. Each unit is tested before shipping to confirm it runs correctly.
Model-Specific Compatibility
The part fits only the four Pavilion 15 models listed above. Buyers must compare the product photos with their existing fan to verify the connector layout and mounting points match. It will not suit other HP series or different Pavilion 15 model numbers.
Straightforward Swap With Visual Check
Installation follows the standard laptop teardown for this chassis: remove the base cover, disconnect the old fan cable, unscrew the heatsink assembly and fit the new unit. The most common issue is ordering the wrong variant, so confirm the part visually before opening the case.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 90% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
Questions about this item
How well does this fan cool a Pavilion 15-ab263ca once installed?
It replaces the original CPU cooler and draws heat away from the processor so the laptop runs at normal temperatures again.
Which connector does the fan use to attach to the motherboard?
The fan plugs into the standard CPU fan header on the HP Pavilion 15-ab series motherboard.
Will the mounting holes line up on a 15-ab292nr chassis?
Yes, the fan is built to match the screw pattern and outline of the original cooler used in the 15-ab292nr and the other listed models.
More in Laptop Cooling Stands & Fans
Similar items
The Perfect Part USB 3 Fan Laptop Cooling Pad Clear
- Cooler
- Notebook
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
Lemincrash L25584-001 CPU Cooling Fan 4 Wires
- Cooling Fan & Heats…
- Notebook
Lemincrash EG50050S1-C030-S9A laptop cooling pad 4-Line .40A
- Cooler
- Notebook





