DBTLAP CPU Cooling Fan MSI GT62 4-Pin 12V 0.65A
A replacement 12 V 0.65 A four-pin CPU cooling fan for compatible MSI GT62 series laptops, tested before shipping
- Accessory categoryCooler
- Replaces faulty CPU fan in compatible MSI GT62 models
- 4-pin 12 V 0.65 A connector matches original specification
- Each unit tested before shipping for reliable operation
- Verify photos and part number to ensure exact fit
- Direct replacement for MS-16L1 MS-16L2 MS-16L3 6RD 6RE 7RE N322 PABD19735BM
Replacement CPU Cooling Fan for MSI GT62 Series
This new DBTLAP cooling fan is built as a direct replacement for the CPU cooler in MSI GT62, GT62VR and related MS-16L1, MS-16L2, MS-16L3, 6RD, 6RE, 7RE and N322 laptops. It suits repair technicians or owners performing their own maintenance who need to match the original part number PABD19735BM exactly. Each unit is tested before shipping to confirm basic operation.
Four-Pin 12 V 0.65 A Power and Thermal Profile
The fan connects via a standard four-pin header and draws 0.65 A at 12 V, matching the motherboard's original power budget and PWM control scheme. This electrical parity means the replacement will spin at the same speed curves and acoustic levels as the factory unit under identical thermal loads. No adapter or wiring modification is required for installation.
Compatibility Decided by Part Number and Connector
The single specification that determines fit is the part number PABD19735BM combined with the four-pin 12 V interface; buyers must verify this code against the sticker on their existing fan before ordering. Laptops outside the listed MSI model families, or units with a different connector pinout or voltage rating, will not accept this cooler. Visual comparison with the product photos is essential to avoid mismatches.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 72% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
Questions about this item
How do I install the 4-pin 12V 0.65A fan in my MSI GT62 and what step is often missed?
Disconnect the battery, remove the bottom cover, unplug the old fan connector, swap the fan, then reconnect the 4-pin cable firmly — the step most people miss is reseating the connector fully so the tachometer signal works.
What maintenance will this replacement fan need later?
Blow dust from the heatsink fins and fan blades every few months with compressed air; the sleeve bearing is not user-lubricable, so plan to replace the fan again when noise or rpm drop appears.
What limit appears first during sustained loads on this 12V 0.65A cooler?
The 0.65 A current ceiling caps maximum rpm, so under long heavy loads the fan hits its speed limit before thermal throttling eases, making regular dust cleaning critical.
More in Laptop Cooling Stands & Fans
Similar items
DNBeffulgent LCP001 Dual TEC Laptop Cooling Pad 12-17" Smoky Black
- 7 in (17.8 cm)
- 6.2 cm × 29.9 cm ×…
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
2-Power MEN-Frienda-1510 thermal pad kit 6 pcs 100 x 100 mm 0.5 1 1.5 2 2.5 3 mm 6.0 W/M blue
- Blue
- 6 x Thermal pads, 1…





