DBTLAP CPU Fan for HP ENVY 17m-CG L87961-001
Replacement CPU cooler fan for HP ENVY 17m-CG laptops, matching part number L87961-001 and running on 5 V DC power
- Accessory categoryCooler
- Keeps HP ENVY 17m-CG running cool with direct-fit replacement fan
- Operates at DC 5V 0.45A for efficient thermal management
- Matches part numbers L87961-001 and EG50040S1-1C220-S9A for 100% compatibility
- Includes single tested fan unit ready for installation
- Verified against real-item photos to ensure correct match
Replacement CPU Fan for HP ENVY 17m-CG
This replacement CPU cooler is built for the HP ENVY 17m-CG laptop using part number L87961-001. It suits owners whose original fan has failed or become noisy. The unit operates at DC 5V with a 0.45A current draw. It restores factory cooling performance for this specific model.
Direct-Fit Design and Connector
The fan assembly matches the original EG50040S1-1C220-S9A form factor for a direct swap. Its connector aligns with the motherboard header without adapters. Each unit is tested before shipping to confirm function. Buyers should verify the part visually against photos before fitting.
Single-Fan Thermal Limit
A single centrifugal fan can only move a finite volume of air through the existing heatsink. Sustained heavy workloads may still push temperatures up if the chassis airflow is restricted. The cooler cannot overcome thermal limits set by the laptop's original heat-pipe design. Users needing lower temperatures under load would require a redesign the chassis cannot accept.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $23.99
- Pricier than about 56% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
Questions about this item
What power connector does the DC 5V 0.45A fan use for the HP ENVY 17m-CG?
The replacement fan connects to the motherboard header used by the original L87961-001 cooler, drawing 5 volts at 0.45 amps.
Will the EG50040S1-1C220-S9A cooler fit the mounting points on an HP ENVY 17m-CG chassis?
The cooler is built to the same screw-hole pattern and bracket shape as the factory L87961-001 unit for the 17m-CG series.
Which step do installers most often skip when swapping the CPU fan on this laptop?
After seating the fan, the cable must be routed under the retention clip and the connector fully seated before the bottom cover is replaced.
More in Laptop Cooling Stands & Fans
Similar items
ThreeH H-UF01 laptop cooling pad 3 fans blue LED 10-15 inch
- 8 in (20.3 cm)
- 4.191 cm × 24.1046…
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
AICHESON S035 Purple Lights laptop cooling pad
- Cooler
- Support up to 17-in…
Adiven AD-SRQ-RD laptop cooling pad 17 inch 4 fans Red LED Black/Red
- Cooling pad
- Support up to 17-in…





