DBTLAP EBMPAPST 5015 5CM 12V 85mA 1.0W 512 F/2 3 Pin laptop cooling pad
Replacement 12 V, 85 mA, 1.0 W cooling fan with 512 F/2 spec and 3-pin connector for laptop cooler
- Accessory categoryCooler
- Efficient 12 V operation at 85 mA
- Low 1.0 W power draw keeps system cool
- 512 F/2 airflow rating for targeted cooling
- 3-pin connector ensures simple compatibility
- New condition guarantees reliable replacement performance
Replacement Fan For EBMPAPST 5015
This 12V cooling fan replaces the original EBMPAPST 5015 unit in compatible laptops. It draws 85mA at 1.0W and connects via a 3-pin header. The 512 F/2 specification matches the factory airflow profile. Buyers who need a different voltage or connector layout cannot use this part.
Fits Laptops Using The 5015 Form Factor
The fan slides into the existing cooling assembly without extra brackets or wiring changes. A 3-pin connection supplies power and speed reporting to the system controller. No additional power adapters or software drivers are required. Builders who lack the 5015 mounting pattern must choose another solution.
Direct Swap For A Worn EBMPAPST 5015
Replacing a noisy or failed 5015 fan restores the original thermal performance. The 1.0W rating keeps power draw identical to the stock component. The upgrade is worth it when temperatures rise or bearing noise appears under load. Users seeking higher airflow than the 512 F/2 design provides will need a different model.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $25.99
- Pricier than about 60% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
Questions about this item
How long can the 1.0W fan run before heat becomes the limiting factor?
The 12V, 85mA motor draws 1.0W continuously, so thermal limits depend on the laptop chassis airflow rather than the fan itself.
What noise and heat should I expect when the 5015 fan runs all day?
At 12V and 85mA the unit operates at its rated 1.0W, producing low audible noise and minimal extra heat inside the laptop.
Which existing laptop connector must match the 3-pin 512 F/2 interface?
The replacement requires a 3-pin header with the 512 F/2 pinout; verify the motherboard socket matches before fitting.
More in Laptop Cooling Stands & Fans
Similar items
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
LUOM TSB02F laptop cooling pad dual fan 11-17.3" black
- Stand
- 16 in (40.6 cm)
ENHANCE K20-3 Laptop Cooling Pad 5 Fans 15.6-17.3in Blue LED 2 USB 2.0 Ports 5 Height Levels
- Cooler
- 14.33 in W × 12.83…





