DBTLAP GPU Cooling Fan for HP EliteBook x360 1030 G3 0FKB30000H 5V .5A 4-pin
Replacement GPU cooling fan for HP EliteBook x360 1030 G3, 5 V 0.5 A four-pin connector
- Accessory categoryCooler
- Keeps the GPU cool with a 5V 0.5A 4-pin fan
- Designed for HP EliteBook x360 1030 G3 part 0FKB30000H
- Tested before shipping to ensure reliable operation
- Direct replacement matches original connector and voltage
- Supports sustained performance during demanding workloads
GPU Cooling Fan for EliteBook x360 1030 G3
This replacement GPU cooling fan is built for the HP EliteBook x360 1030 G3 using part number 0FKB30000H. It suits technicians and owners repairing a worn or noisy original cooler in this specific convertible laptop.
Thermals and power in normal use
The fan runs on DC 5V at .5A through a 4-pin connector to draw heat away from the graphics subsystem. Each unit is tested before shipping to confirm correct spin-up and airflow for the 1030 chassis.
Upgrade context and when to fit it
This part replaces the factory GPU cooler when bearings fail or airflow drops below specification. The jump is worth it when the original fan rattles, overheats or stops spinning, and the 1030 G3 model matches the part number exactly.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $30.99
- Pricier than about 73% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
Questions about this item
How do I install the 4-pin GPU cooling fan in my HP EliteBook x360 1030 G3 and what step do people often miss?
Disconnect the battery, remove the bottom cover, unplug the old fan's 4-pin connector, swap the fan, reconnect the 4-pin cable firmly, then reassemble. People often forget to reconnect the battery before testing.
What maintenance will this 5V 0.5A cooling fan need over time?
Dust buildup on the blades and heatsink fins reduces airflow. Clean with compressed air every few months. If bearing noise appears or the 4-pin PWM signal fails, replace the whole fan unit.
What limit appears first when this GPU fan runs continuously under heavy load?
The 5V 0.5A power budget caps maximum speed. Sustained 100% duty cycle can hit that current limit, causing the fan to throttle or the controller to reduce PWM duty to stay within 0.5A.
More in Laptop Cooling Stands & Fans
Similar items
Thermaltake Pacific DIY 16mm OD PETG Compression Fitting Kit Chrome
- Cooler
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
LUOM C08LS-Silver Laptop Stand 10-15.6" Aluminum
- Stand
- Support up to 15.6-…





