DBTLAP GPU CPU Cooling Fan HP TPN-C149 ENVY X360 15m-ed
Replacement GPU and CPU cooling fan set for HP Envy x360 15m-ed models
- Accessory categoryCooler
- Cools both GPU and CPU with dual fans
- Matches HP TPN-C149 ENVY X360 15m-ed exactly
- Replaces OEM parts L93193-001 and L93194-001
- Supplied as a tested pair of two fans
- Verified compatible with EG50040S1-CK00-S9A and EG50040S1-CK10-S9A
Replacement GPU and CPU Fan Set
This two-fan assembly is built for the HP TPN-C149 ENVY X360 15m-ed laptop. It matches part numbers L93193-001 and L93194-001 plus EG50040S1-CK00-S9A and EG50040S1-CK10-S9A. Buyers who need a direct swap for a worn or noisy original cooler will find the correct fit here. Units that use a different fan layout or connector are not compatible.
Thermals and Noise in Daily Use
Each fan is tested before shipping to confirm it spins freely and moves air across both the GPU and CPU heatsinks. The pair works together to lower internal temperatures during typical workloads such as browsing, video playback or office applications. Acoustic output stays close to the laptop's original profile because the design mirrors the factory specification. No power-draw figures are published for this accessory.
Upgrading From a Failed Original
This set replaces the stock cooling module when one or both fans have stopped spinning, rattle or trigger thermal throttling alerts. The jump is worth it when the laptop shuts down under load or the chassis becomes uncomfortably hot. If the heatsink fins are clogged with dust but the fans still run, cleaning may be enough and a new fan set is not required.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $31.99
- Pricier than about 75% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
Questions about this item
How do I install the GPU and CPU cooling fans in my HP ENVY X360 15m-ed, and what step do people often miss?
Remove the bottom cover, disconnect the battery, then unplug the old fan cables before fitting the two new fans; the step most people miss is reconnecting both the GPU and CPU fan headers to the motherboard before closing the case.
What maintenance will these two fans need later?
Blow dust from the heatsink fins and fan blades with compressed air every few months; if bearing noise appears or airflow drops, replace the affected fan with another L93193-001 or L93194-001 unit.
What limit appears first when the fans run continuously under heavy load?
The thermal limit of the laptop chassis is reached before the fans themselves max out, so sustained loads will throttle the CPU and GPU once the heatsink saturates.
More in Laptop Cooling Stands & Fans
Similar items
3M AG14.0W9 14" anti-glare privacy filter
- Privacy Filter
- Anti-Glare: Yes, As…
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…





