DBTLAP Laptop Cooling Fan For EG50060S1-C460-S9A DC5V .41A 4pin
Replacement cooling fan rated DC5V 0.41A with four-pin connector for compatible laptop models
- Accessory categoryCooler
- Direct replacement for EG50060S1-C460-S9A models
- Operates at DC5V 0.41A for efficient cooling
- Four-pin connector ensures secure motherboard connection
- Each unit tested before shipping for reliability
- Verify part number using photos for 100% compatibility
Replacement Cooling Fan for EG50060S1-C460-S9A
This is a direct-replacement laptop cooling fan built to the EG50060S1-C460-S9A specification. It suits owners of compatible notebooks who need to restore original airflow after a bearing failure or blade damage. The unit ships new and pre-tested so it can be fitted without additional verification steps. Buyers who need a complete cooling assembly with heatsink or shroud should look elsewhere.
Electrical Specs and Airflow Headroom
The fan runs on DC5 V and draws 0.41 A through its four-pin connector, matching the OEM power budget exactly. That rating supports the thermal load the original design was validated for, but it leaves no margin for overclocked CPUs or GPUs that push heat output beyond stock limits. Systems already running at thermal throttle points will not gain extra headroom from this swap alone.
Mechanical Fit and Build Integration
The four-pin interface carries both power and speed-control signals, letting the motherboard manage fan curves without adapter cables. Physical mounting points align with the EG50060S1-C460-S9A chassis cut-outs, so no drilling or bracket modification is required. Clearance around nearby heat pipes or VRM heatsinks is unchanged, keeping the existing service path intact. Builders working on models with a different part number must verify compatibility before ordering.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $24.99
- Pricier than about 58% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
Questions about this item
Will the 4-pin EG50060S1-C460-S9A fan connect to my existing laptop motherboard header?
The fan uses a standard 4-pin connector rated for DC5V 0.41A; match that pin-out and voltage to your board header before fitting.
How can I confirm the replacement fan is spinning correctly once installed?
Each unit is tested before shipping; after fitting, listen for steady airflow and check that the laptop reports normal temperatures under load.
What comes in the box and do I need any extra cables or screws?
The package includes only the 1x cooling fan; mounting screws, cables or thermal pads are not supplied and must be sourced separately.
More in Laptop Cooling Stands & Fans
Similar items
Urban Factory AST01UF laptop cooling pad aluminium
- Riser
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
LUOM TSB02F laptop cooling pad 11-17.3" 4 fans black
- Holder
- 16 in (40.6 cm)
Elfzone Laptop Cooling Pad 15-17in 2 Fan Black
- 25 in (63.5 cm)
- Black





