DBTLAP laptop cooling pad for Samsung E3415 E3420 RC410 RC420 KSB0705HA
Replacement CPU cooling fan compatible with Samsung E3415, E3420, RC410 and RC420 laptops
- Accessory categoryCooler
- Compatible with Samsung E3415 E3420 RC410 RC420 KSB0705HA models
- Each fan tested individually to ensure 100% working condition
- 9-month warranty provided for peace of mind
- Supplied by Forcecon, ADDA, Sunon or Kipo depending on stock
- Verify photos against your original fan before purchase
Compatible Samsung Laptop Models
This replacement CPU cooling fan fits Samsung E3415, E3420, RC410 and RC420 laptops. It matches part number KSB0705HA and is intended for owners of those specific models who need to replace a worn or noisy original fan. The accessory type is a cooler designed for direct CPU thermal management.
Replacing a Failed Original Fan
The unit serves as a direct swap for the factory-installed fan in the listed Samsung notebooks. The upgrade is worth it when the original cooler develops bearing noise, reduced airflow or complete failure. Each item is tested individually before shipping to confirm 100 per cent operation.
Straightforward Installation With Checks
Installation follows the standard laptop disassembly process for the compatible models. Buyers should compare the replacement against the original fan using the supplied photos before fitting. The manufacturer notes that fans may come from Forcecon, ADDA, Sunon, Kipo or other suppliers depending on stock, so connector orientation and mounting tabs must be verified.
How it compares
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 76% of the 6,169 comparable items (median $20.99).
Specifications
| Product | |
|---|---|
| Accessory category | Cooler |
Questions about this item
Does the fan mount to the screw holes on Samsung E3415, E3420, RC410 and RC420 chassis?
The fan is built to the KSB0705HA form factor used in those Samsung models so its mounting points line up with the original holes.
What is the installation step people often miss when fitting this replacement fan?
After securing the fan, reconnect the 3-pin power cable to the motherboard header before reassembling the laptop or the fan will not spin.
How long before the Forcecon, ADDA, Sunon or Kipo motor typically needs replacement?
Under normal use the sleeve-bearing motor runs for several years; replace it when bearing noise appears or RPM drops below spec.
More in Laptop Cooling Stands & Fans
Similar items
Thermaltake CL-W098-CA00SL-A G1/4 PETG 45-Deg Dual Compression 16mm OD Fitting
DELL MGK85 laptop lid cover 17" blue for Inspiron 17R N7110
- Skin / Cover
- SWITCH by Design St…
LUOM N3 Adjustable Aluminum Laptop Stand Silver
- Stand
- Support up to 15.6-…
LUOM N3 laptop cooling pad Black 15.6 in 0.6 lbs
- Holder
- Support up to 15.6-…





